looking to have a heatsink made

[justinjja]

I know i have seen a few people with signatures that say they can make custom HS's who are they?

Here is my initial plans, if anyone sees any issues please let me know.

I would like to get a price for each of these in copper and alu
and let me know if you can do it for less if i buy a couple of them


possibility 1:

possibility 2:

Edit: a little more info:

I measured my host to be 20.89,
so i figured 20.85 would be good, but Im not sure how accurate these thing can be made, so if it has to be 20.8, 20.5, or even 20 then so be it

Im not very knowlegeable about the cost of metal, vs the cost of getting someone to do this ect,
I would perfer the larger one, but probably not if it is going to cost like 2x as much

and the same goes for copper vs alu

I'm not in a huge rush to get it, but the sooner the better.

aslo it may be worth mentioning that i will be using one of Pontiacg5/aixiz's copper modules,
which i believe are made to a tighter standard than common aixiz modules.

Im in lubbock, texas 79406

 

[Alexizupinhea]

How long is the bottom half dimension? Just saying, it's sort of the only length missing.

 

[123splat]

Overall length?? (re: the missing dimension)
Could you be a little more specific than "20.85, or less"? (like 20.85-20.7mm, or, how about 20mm?)
Where in Texas? which one is your preference? When do you want it?
Aixiz hole size (12mm bore?).

 

[justinjja]

How long is the bottom half dimension? Just saying, it's sort of the only length missing.

Thanks, not sure how i missed that :shhh:

Overall length?? (re: the missing dimension)
Could you be a little more specific than "20.85, or less"? (like 20.85-20.7mm, or, how about 20mm?)
Where in Texas? which one is your preference? When do you want it?
Aixiz hole size (12mm bore?).

Im in lubbock, 79406

as for the 20.85, I measured my host to be 20.89,
so i figured 20.85 would be good, but Im not sure how accurate these thing can be made, so if it has to be 20.8, 20.5, or even 20 then so be it

Im not very knowlegeable about the cost of metal, vs the cost of getting someone to do this ect,
I would perfer the larger one, but probably not if it is going to cost like 2x as much

I'm not in a huge rush to get it, but the sooner the better.

I believe 12mm is right for an aixiz hole,
aslo it may be worth mentioning that i will be using one of Pontiacg5/aixiz's copper modules,
which i believe are made to a tighter standard than common aixiz modules.

 

[edy]

I have a nice, quick, custom made heatsink from Eudaimonium. Try PM him.

 

[justinjja]

I have a nice, quick, custom made heatsink from Eudaimonium. Try PM him.

Thanks for the tip, will do :thanks:

Edit:
PM'ed Eudaimonium and Jayrob, ill see what they have to say

 

[Eudaimonium]

I can do aluminium only, but yes those are fairly simple heatsinks.

Price for those would be $15 each from me.

You'd get a discount if you'd buy a REALLY large quantity, as in 20 or so. I try to keep the prices low from the start, from one heatsink, hence not much for quantity discounts.

PM replied to, let me know what you decide

 

[rhd]

^^ He's great!

 

[Alexizupinhea]

Overall length?? (re: the missing dimension)
Could you be a little more specific than "20.85, or less"? (like 20.85-20.7mm, or, how about 20mm?)
Where in Texas? which one is your preference? When do you want it?
Aixiz hole size (12mm bore?).

At the time I posted, you were missing the 17mm dimension in your picture...

Edit: And no I'm not crazy. I was guessing you added the 17mm because of my suggestion, but apparently not.

 

[justinjja]

At the time I posted, you were missing the 17mm dimension in your picture...

Edit: And no I'm not crazy. I was guessing you added the 17mm because of my suggestion, but apparently not.

Not sure exactly what your talking about :thinking:
I did add the 17mm to the drawing because you told me it was missing :thanks:


Ordered one from Eudaimonium :drool:
thanks for your help everyone