Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Laser Point and measurement

Joined
Mar 15, 2012
Messages
2
Points
0
Hello guys,

I want to built for myself laser pointing and laser measurement tool. As it always takes me a lot of time to make these measurements. But there is nothing on the market that is where I am looking for.

And I like to do DIY hehe

I made a drawing how I need it but no idea to add it here.

But I explain. I have a square every corner had a measurement point 1,2,3&4.

Distance 1 to 2, 3 to 4 is between 900-1100mm
Distance 2 to 3, 1 to 4 is between 800-1200mm

I need to do alignment from these point so I was thinking to put a laser at point 1 to 2 and 3. And a laser from 4 to 2 and 3. in the corner of 2 and 4 I place a plate do see the alignment.

then i like to measure the distance also from the same points.

I saw some nice distance meters and also alignment with ready made beams but it is not all 100% what i need that's why i built myself.

Anyone know which laser I best can use?

6841425258_9391a77929_b.jpg

6841439492_3b608730a5_z.jpg
 
Last edited:





DrSid

0
Joined
Jul 17, 2010
Messages
1,506
Points
48
I'm quite puzzled about what you are talking about .. maybe picture would help ?
 
Joined
Dec 27, 2011
Messages
2,062
Points
48
Take a picture of your drawing with a phone and upload it to Flickr, photobucket, imageshack or something like that...
 
Joined
Mar 15, 2012
Messages
2
Points
0
OK thanks I added the drawing/picture.
Let me know if anything you like to know.
 
Joined
Dec 27, 2011
Messages
2,062
Points
48
Very cool. I'm not sure if I'll be any help, but hopefully that will inspire someone here to figure something out!
 




Top