LBPark
0
- Joined
- Feb 28, 2012
- Messages
- 69
- Points
- 0
I have soldered Micro Flexdriver for set the ampere to 500mA-1.5A.
and wires were also soldered.
And after that I was in contact with the diode for the test.
However, the diode did not respond.:cryyy:
(The diode is a new one.)
This was my first soldering though.
but I thought I did it well....what the problem:thinking:
Overheating the board or what else?
and wires were also soldered.
And after that I was in contact with the diode for the test.
However, the diode did not respond.:cryyy:
(The diode is a new one.)
This was my first soldering though.
but I thought I did it well....what the problem:thinking:
Overheating the board or what else?