help on wiring laser module to host

[australialaser]

i need some help on laser module i brought a laser module from ebay and i am using a LPC 826 diode and i heard i have to connect the not used piin as well the driver ad i cant do that i have to bend the pin and it will thouch the other pins and the host has a button and the driver im buying has no button can any one help please

 

[Ghostchrome]

Wooooo breathe, man... Punctuation in your post and pictures of your host will aid you better in your quest for help.

 

[australialaser]

i swear its my keyboard its on low battery and doesnt write every letter i press on the keyboard

 

[australialaser]

heres the link for the driver: New 650-980nm 20-250mW TTL Laser Diode Driver 4.0-5.0V | eBay
the link for the host: eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

 

[Fiddy]

Wow man double check your spelling and punctuation before you post!

There are threads about the connection of the lpc-815 which by if you did some reading you would find that they share the same pin out of the lpc-826 and all LOC diodes...
I suggest you search & read before you post a new thread again, that's been answered a million times before, if you keep i up you will piss off a lot of people on this forum!

A quick search revealed:

http://laserpointerforums.com/f50/lpc-826-handheld-case-pin-67047.html

http://laserpointerforums.com/f51/pro-tips-w-spyderz20x6-building-your-first-diy-laser-40157.html

http://laserpointerforums.com/f50/pin-out-diagram-lpc-815-a-36132.html

http://laserpointerforums.com/f50/need-help-wiring-red-driver-57331.html

http://laserpointerforums.com/f50/bridge-two-postive-pins-lpc-815-a-50819.html

Fiddy.

 

[australialaser]

im serious my keyboard was on low battery i promise and wasn't typing properly

 

[australialaser]

thanks for the links fiddy very helpful but i still dont understand my driver doesnt have a spring i tried looking on google i cant find any answers

 

[Fiddy]

heres a suggestion, solder your own spring on!

 

[australialaser]

ok but i asked the question in the first place for a reason! it has no holes for the spring

 

[Fiddy]

If it is too hard for you, find a driver with a spring...

 

[australialaser]

ok thanks

 

[Bionic-Badger]

You can use a pen-spring if you had to.

 

[australialaser]

nah no need i got one spare from my rc car

 

[australialaser]

if i solder the case pin to negative pin will it work because i cant connect the case pin to the driver even if i bend it it wont reach, any ideas

 

[Fiddy]

if i solder the case pin to negative pin will it work because i cant connect the case pin to the driver even if i bend it it wont reach, any ideas

Case pin is negative pin on LPC-826.......

 

[LaZeRz]

Case pin is negative pin on LPC-826.......

Yah, the other pin is feedback or something.