Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



FS* New Style Dorcy Jr. Heat Sinks

martianpc

New member
Joined
Nov 9, 2009
Messages
82
Points
0
When you took the stock driver out of the Dorcy, how did you do that? Also, your spring on the flexdrive, that connects to the positive connector on the flexdrive right? And then the other end presses against what? The battery? And the negative post on the flexdrive connects to what??? Sorry if I sound dumb, couldnt find the answer. -Mike
 



Ehgemus

New member
Joined
Feb 28, 2009
Messages
1,385
Points
0
When you took the stock driver out of the Dorcy, how did you do that? Also, your spring on the flexdrive, that connects to the positive connector on the flexdrive right? And then the other end presses against what? The battery? And the negative post on the flexdrive connects to what??? Sorry if I sound dumb, couldnt find the answer. -Mike
To get the stock driver out just use a socket and a hammer to punch it out but leave the aluminum sleeve part in there. The spring is soldered to the positive connector. the negative is not connected to anything because the host itself is your negative contact. go to this link and look at the wiring diagrams.

http://hacylon.case.edu/ebay/laser_diode/MicroFlexDrive_V5_manual.pdf
 

ZheolD

New member
Joined
Aug 21, 2009
Messages
99
Points
0
I would like one of these plz as i Destroyed my other new dorcys hah but i was abel to get the gutts out of my 2nd one just fine.

Payment sent.


Cheers
Josh
 

charliebruce

Well-known member
Joined
Nov 22, 2008
Messages
1,550
Points
48
Epic resurrection here, I know, but are you still selling or making these? I'd like to buy one if possible, please.

PM me with payment details?
 




Top