Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



FS...Limited quantity DIY G1 LPM PCBs + Docs with or without Parts

lasersbee

Well-known member
Joined
Sep 20, 2008
Messages
17,622
Points
113
LIMITED QUANTITY SOLD...

We have a limited number of first generation LaserBee A (formerly
LaserBee E (Econo)) Laser Power Meter Printed Circuit boards to offer.

You can order a bare PCB with your own parts sourcing or you can order
a bare PCB and we supply the parts on the PCB. Wires and off board
parts are not included.

In each case we will supply a Parts list and parts placement and a basic
calibration sequence sheet..

The only thing that is not included is a Thermopile Sensor or Heatsink.
There is enough information on the Forum for you to easily make one
with common parts from TEC and/or Heatsink suppliers.

It is to be noted that these LB-E PCBs will require a 2V full scale volt
meter with it's own supply to be able to read up to 2 Watts.
You can not hook into the PCB's supply to get power for a voltmeter.

If you hook it up to an inexpensive Digital Multimeter you will be
able to read in 0.1mW increments up to 200mW and 1mW increments
up to 2000mW. It will read in 10mW increments above 2000mW.
The PCB once calibrated will output 1mV/1mW...

Of course the maximum power depends on your sensor's coating as
usual.

This LB-E PCB also features a True Zeroing control circuit that works
even after testing many high powered lasers.

NOTE:-

1) You must know and have basic assembly and soldering skills.
2) We will not build the PCB for you.
3) We will not test your PCB for you
4) After the first soldered connection is made to the PCB it is no longer
returnable or refundable.
5) Do not order these PCBs if you are unsure of your assembly abilities.

We have built at least 5 of these PCBs and they all function correctly.


==================================================
Shipping and Paypal fees are included. Available to Canada and
the USA only at this price.
International buyers will need to PM me for additional Shipping costs.

==================================================

To order a Bare PCB + Documentation... just send a PayPal payment
of $19.99Cnd to our PayPal ID below.

To order a Bare PCB + Documentation + all parts that mount on the PCB...
just send a PayPal payment of $33.99Cnd to our PayPal ID:

PayPal ID: sales@laserbeelpm.com

Make sure your Full Name and Complete address is correct on your
PayPal account when sending your payment.
DON'T FORGET TO INCLUDE YOUR LPF Username...
Please state what you are paying for in the Note...

YOU MUST SEND ANY PAYMENTS AS GOODS so that we can print
out a PayPal Shipping Label..


Jerry


You can contact us at any time on our Website: J.BAUER Electronics
 

Attachments

Last edited:



jimdt7

Well-known member
Joined
Feb 5, 2011
Messages
1,899
Points
48
Re: FS...Limited quantity DIY G1 LPM PCBs with or without Parts + Docs

Very nice PCB, it will help a lot of people !
:gj:
 

ElektroFreak

New member
Joined
Nov 7, 2008
Messages
5,728
Points
0
Re: FS...Limited quantity DIY G1 LPM PCBs with or without Parts + Docs

Neat offer Jerry! I think I might try one of those out shortly..
 

azzman372

New member
Joined
Jun 12, 2011
Messages
278
Points
0
Re: FS...Limited quantity DIY G1 LPM PCBs with or without Parts + Docs

If I got this, would I be able to use my thermopile from the laserbee 2.5w usb?
 

lasersbee

Well-known member
Joined
Sep 20, 2008
Messages
17,622
Points
113
Re: FS...Limited quantity DIY G1 LPM PCBs with or without Parts + Docs

If I got this, would I be able to use my thermopile from the laserbee 2.5w usb?
Yes you could... But you would still need to calibrate the
PCB electronics to your Thermopile...

@ EF and jimdt7..
Thanks guys..:beer:


Jerry


You can contact us at any time on our Website: J.BAUER Electronics
 
Last edited:







Top