Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



FS: dichros

Flaminpyro

Well-known member
Joined
May 4, 2009
Messages
5,461
Points
113
In stock and ready for shipment are two different sizes of dichro filters one is 31.5 x 21.75mm and the second one is 27 x 18mm
The large one seems to pass blue and red and reflect green and the smaller one passes blue and reflects red and green.
They are $10.00 each or both for $18.00

http://laserpointerforums.com/f42/casio-dichro-figures-53597.html#post753192

http://laserpointerforums.com/f42/casio-dichro-figures-53597.html#post779924



Sometimes they get a broken edge and are not full size, they are how ever still plenty big enough to cut in 1/2 and still have two good usable dichros.




other parts available please PM me for details or check out this link> http://laserpointerforums.com/f39/flaminpyros-stuf-67118.html#post966672
 
Last edited:



daguin

New member
Joined
Mar 29, 2008
Messages
16,576
Points
0
Re: FS: dicros

These are large enough to cut in half :)

Peace,
dave
 
Last edited:

anselm

New member
Joined
Nov 22, 2010
Messages
2,470
Points
0
"mark" them with a glass cutter along a ruler, then snap in half while protecting hands and glass
with something tough yet soft, like leather for example..
 
Last edited:

Flaminpyro

Well-known member
Joined
May 4, 2009
Messages
5,461
Points
113
I'll give that a try, Thanks ;)


"mark" them with a glass cutter along a ruler, then snap in half while protecting hands and glass
with something tough yet soft, like leather for example..
 

Twisted

New member
Joined
Sep 6, 2011
Messages
180
Points
0
In stock and ready for shipment are two different sizes of dichro filters one is 31.5 x 21.75mm and the second one is 27 x 18mm
The large one seems to pass blue and red and reflect green and the smaller one passes blue and reflects red and green.
They are $10.00 each or both for $18.00

http://laserpointerforums.com/f42/casio-dichro-figures-53597.html#post753192

http://laserpointerforums.com/f42/casio-dichro-figures-53597.html#post779924




other parts available please PM me for details or check out this link> http://laserpointerforums.com/f39/flaminpyros-stuf-67118.html#post966672
Hey, Tomorrow (your probably reading this today now :p) I'm going to buy both for 18$ ( hopes for free shipping ;) ) can you send me some kind of paypal or ebay link? Hates PayPal but won't give out credit card info :/ lol.
 

Twisted

New member
Joined
Sep 6, 2011
Messages
180
Points
0
Hmmm, So I could setup a red and a green to be reflected to make yellow and a violet to pass to make white?
 

Twisted

New member
Joined
Sep 6, 2011
Messages
180
Points
0
Here's my crappy diagram explaining what I wanna do to make sure it works...

 

Alexizupinhea

New member
Joined
Mar 25, 2008
Messages
1,008
Points
0
Nope, sorry, it is not possible. Angle of incidence = angle of reflection (with respect to the normal - the imaginary line perpendicular to the plane of the dichro). It is not possible, since in your hypothetical setup, the red beam would be literally going into the green laser itself, and vice versa. You pretty much need two dichros to "completely" combine beams.

Edit:

It is probably worth mentioning that you cannot even combine two colors using a single dichro if one of the beams is perpendicular to the dichro (as in your picture). Because angle of incidence of the second beam will always be greater than 0, which means it can never result in an angle of reflection of 0 (which it would need to combine with the 405nm laser in your drawing).
 
Last edited:

bennett326

Well-known member
Joined
May 10, 2011
Messages
1,964
Points
48
with both dichros you could but not like that the dichro is at 45 degree angle one laser reflects of of it 90 degrees and the other beam passes straight through it
 

Twisted

New member
Joined
Sep 6, 2011
Messages
180
Points
0
Alright thanks guys, I will buy some parts for it maybe the dichro tomorrow night. Oh and I took my DX 5mW 405nm 17$ ver apart and now it won't work, Help pls :(
 




Top