Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Fs: CUSTOM LASER HOSTS FOR HIGHER POWER BUILDS, NEW HOST ADDED 2/9/16

Ehgemus

New member
Joined
Feb 28, 2009
Messages
1,385
Points
0
PLEASE SEND ME A PM IF YOU SEE SOMETHING YOU WANT THAT IS ALREADY SOLD, I CAN BUILD YOU ONE JUST LIKE IT.

THERE IS (1) HOSTS AVALABLE TO SHIP NOW.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

This host holds 2x18650 batteries and a full 12x30mm laser module. This will be a great host for the 6W diode because it has a larger heatsink, 1-5/8" dia. Also has a driver heatsink witch you need for that diode. Host is 10-5/8" long. Clicky switch in back and a side momentary switch. The handle is real carbon fiber not a vinyl wrap like some of my other hosts. The host is wired and ready to build. Build time should be about 20min with this host. Thanks

125.00 shipped
International buyers please add 8.00 for shipping.










------------------------------------------------------------------------------------------------------
Up for sale is a pretty unique looking host, kind of has a ray gun look to it. It holds 1x18650 battery or 2x18350 batteries. There is a switch in the back tail cap that almost looks like it's not there but it is for added safety on higher power builds. Host is pre wired and ready to build.
Host has a place to heatsink the driver, pictures below show how the host comes apart. Side switch is momentary. Host dimensions are 1-5/8" dia heatsink and length of the host is 9" long.

SOLD125.00 free shipping
International buyer add 8.00 for shipping.

Thanks








-----------------------------------------------------------------------------------------------------
This host holds 1x18650 battery or 2x18350 batteries. Focus ring in front and a clicky switch in back. Side switch is momentary. The host comes with a driver heatsink if you need to heatsink the driver. Host is 9" long and 1.5" dia heatsink. Host is pre-wired and ready to build.

SOLD120.00 shipped
International buyers please add 8.00 for shipping. Thanks





This picture showed the switch pushed in the on position.





==========================================================

SOLD. This host is 7" long and has a 1-5/8" Dia heatsink and will work great for a higher powered build. Host is pre wire and comes with a heatsink for the driver. The host holds 1x18650 or 2x18350 batteries. The host also has a leather wrapped handle and has a real nice feel to it. Focus ring in front clicky switch in back.

SOLD 90.00 shipped
International buyers add 10.00 for shipping.







========================================================

This host is made for a higher powered build, it holds 2x 18650 batteries and a 12x30 mm module. Would be a great host for the 6W diode or anything smaller. The host is 9.75" long and 1.5" dia heatsink. Focus ring in front and clicky switch in back. This host also has a heatsink for the driver.
The host is pre-wired for a super quick and easy build.

SOLD 120.00 shipped in the US.
International buyers please add 8.00 for shipping.
Thanks for looking!










=======================================================

**SOLD**This host holds 2 18650 batteries and a 12x30 mm module, or DTR module. This host has a focus ring. This host has a pretty good size heatsink, 1-5/8" Dia. The host is 10.25" long. Side momentary switch and a tail switch for added safety. The host is pre-wired and ready to build. The handle is white carbon fiber wrapped vinyl.

**SOLD**90.00 shipped in the US.
International buyers add 10.00 for shipping.
Thanks

















---------------------------------------------------------------------------------------

This host holds 2 18650 batteries and a full 12x30mm module of prebuilt DTR module. This host has a place to heatsink the driver and would be good for the higher power build. Has a focus ring in front. Clicky switch in back. Host is 10-1/4" long and the heatsink is 1-1/4" dia for a great duty cycle. The handle is vinyl carbon fiber, very durable and has a great feel.


SOLD 82.00 shipped is the U.S.
International buyers please add 12.00 for shipping.

Thanks












--------------------------------------------------------------------------------------------------------


This host holds a full 12x30mm module and 2x18650 batteries. The host is pre wired and ready to build. There is a place to heatsink your driver if your driver needs it. The switch in the side is momentary and there is a clicky switch in back for added safety. The host is 10.25" long.

SOLD82.0 shipped
International buyers please add 12.00 for shipping.









~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This host holds 2 18650 batteries and a 12x30mm module or prebuilt DTR module. The host has a clicky switch in back and a side momentary switch in front. The back switch is a great safety feature. The front of the host has a focus ring that blends perfectly with the rest of the host. The heatsink on this host does come off if you want to heatsink the driver. Please let me know if you need a driver heatsink.
The host is 10" long and heatsink dia is 1.25"

SOLD90.00 shipped in the U.S.
International buyers please add 12.00 for shipping.









^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Up for sale is a very nice host with Carbon fiber wrapped handle. The host holds 2x18650 batteries and a full 12x30mm module. Clicky switch in back and a focus ring in front. This host was built for a higher powered laser and has a place to heatsink the driver. This host also has a 1.5 dia heatsink, bigger than all the others on this for sale thread. The host is 10" long

SOLD95.00 with free shipping in the U.S.
International shipping please add 12.00
Thanks for looking!








=======================================================
>
SOLDThis host holds 2 26650 batteries and a full 12x30mm module of prebuilt DTR module. This host has a place to heatsink the driver and would be good for the higher power builds like the new 6W diode. The host is pre wired and ready to build. Has a focus ring in front. Clicky switch in back for added safety and a momentary switch in the side. The Host is 10.5" long and the heatsink is 1.5" dia.

105.00 shipped in the U.S.
International buyers please add 12.00 for shipping.






-------------------------------------------------------------------------------------------
SoldThis host holds 2 18650 batteries and a full 12x30mm module of prebuilt DTR module. This host has a place to heatsink the driver and would be good for the higher power build like the new 6W diode. Has a focus ring in front, Clicky switch in back for added safety, and a momentary switch in the side. Host is 10.25" long.

110.00 with free shipping in the U.S.
International buyers add 12.00








This picture shows the driver heat sink. It is a half Moon piece of aluminum and your driver gets glued to it than the half Moon aluminum piece gets glued into the tube .



==========================================================


SOLDUp for sale is a very nice host with Corbon fiber wrapped handle. The host holds 2x18650 batteries and a full 12x30mm module. Clicky switch in back and a focus ring in front. This host was built for a higher powered laser and has a place to heatsink the driver. I will add a picture of that tomorrow. The host is 10" long

105.00 shipped in U.S.
International shipping add 12.00












****************************************************************************


This host holds 2 18650 batteries and a full 12x30mm module of prebuilt DTR module. This host has a place to heatsink the driver and would be good for the higher power build like the new 6W diode. Has a focus ring in front, Clicky switch in back for added safety and a momentary switch in the side. The white paint is powder coat. Host is 11" long and the heatsink is 1-3/8" dia for a great duty cycle.

SOLD120.00 shipped is the U.S.
international buyers please add 12.00 for shipping.








===========================================================

SOLDThis host holds 2 18650 batteries and a full 12x30mm module of prebuilt DTR module. This host has a place to heatsink the driver and would be good for the higher power build like the new 6W diode. Has a focus ring in front, Clicky switch in back for added safety and a momentary switch in the side. The white paint is powder coat. Host is 11" long and the heatsink is 1-3/8" dia for a great duty cycle.

SOLD120.00 shipped is the U.S.
international buyers please add 12.00 for shipping.







 
Last edited:



Jstr

New member
Joined
Feb 10, 2014
Messages
347
Points
0
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS.

:drool:

man, thats nice! If only I had the money...

Good luck with the sale!
 

10fenny

Well-known member
Joined
Sep 10, 2014
Messages
1,054
Points
83
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS.

ive spent.. IDK how much on hosts these past few weeks or I would snatch this..."save money for end of the month camping!" I keep telling myself!!!
Maybe next round.. great work!!
 

Ehgemus

New member
Joined
Feb 28, 2009
Messages
1,385
Points
0
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS.

I know what you mean, I wish I could afford on of those new diodes to put in this. :cryyy:
 

Alaskan

Well-known member
LPF Site Supporter
Joined
Jan 29, 2014
Messages
12,091
Points
113
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS.

I like it, I just bought the other one he made and now I see this with a slightly bigger head on it... I like my laser pointers to have massive heat sink heads.
 

kiwi37

Member
Joined
May 26, 2015
Messages
110
Points
18
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS.

Looks great I say. I'll be after one of these in a week or so.
 

Pman

Well-known member
Joined
Nov 28, 2012
Messages
4,444
Points
113
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS.

Pretty nice unit as always.
I have wondered for some time where the line is between heat-sink cooling and diminishing return.
 

Alaskan

Well-known member
LPF Site Supporter
Joined
Jan 29, 2014
Messages
12,091
Points
113
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS.

One of the nice things about Egemus hosts is he has great heat coupling from the head to the body of the host, so the whole handle becomes a heat sink too, sometimes without any seam between the head and the body. That's great work, it really increases the amount of surface area for the heat to transfer to the air with, but for the higher power laser diodes coming out now, I think the heat sink fins need to be deeper.

I've never had a problem with any of the hosts this man has made, I have lots of them now and they all work great but I have a great affinity for deep heat sink fins :) When I see one of his hosts with deep heat sink fins, I see the word BUY written all over it every time! This last host, photo above, has a nice balance of mass to heat sink fins, very nice.
 
Last edited:

debk

New member
Joined
Jul 28, 2015
Messages
1
Points
0
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS.

I am interested in a host like this I want to build a laser usuing a NUBM 44 diode.
Also sent you a PM

Thanks

Debra
 

Ehgemus

New member
Joined
Feb 28, 2009
Messages
1,385
Points
0
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS.

New host added^^^ 8-3-15
 

Alaskan

Well-known member
LPF Site Supporter
Joined
Jan 29, 2014
Messages
12,091
Points
113
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS. NEW HOST ADDED 8-3-15

Bump ;)
 

Ehgemus

New member
Joined
Feb 28, 2009
Messages
1,385
Points
0
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS. NEW HOST ADDED 8-9-10

New host added.^^^^
 

Alaskan

Well-known member
LPF Site Supporter
Joined
Jan 29, 2014
Messages
12,091
Points
113
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS. NEW HOST ADDED 8-9-10

Well unless someone sticks their head up for this today, i'm buying it. I have bought so many from him lately i wanted to give domeone else a shot at one of these beauties.
 

Ehgemus

New member
Joined
Feb 28, 2009
Messages
1,385
Points
0
Re: Fs: CUSTOM LASER HOSTS FOR HIGHER POWERED BUILDS. NEW HOST ADDED 8-9-10

New host added 8-10-15 ^^^
 




Top