Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

ArcticMyst Security by Avery | Browser Hide by Avery

FS custom focus rings for any build

Joined
May 4, 2009
Messages
5,426
Points
113
Howdy all I now have fancy, cool, slick, focus ring replacements for any build !
This model of focus ring will screw right onto your 9 x .5 mm threaded lens nut.
and if you have one of them 1/2 threaded 405 lenses not a problem I make a press fit model ;)
These very cool looking focus adapters are $15.00 in aluminum or $20.00 in copper for the smooth style 30 Cal.

Here's a BrushFire C3 with a 30 Cal. focus ring :)
34fmi3o.jpg


And a couple Aurora C6 with a nice copper 30 Cal. focus ring ;)
sd0ay8.jpg


And a couple Stainless Steel SH-032 with a Aluminum 30 Cal. focus adapter.




And the cool looking HYDRA focus ring $20.00 for the smallest model ;)
1sk4zs.jpg




And the larger sizes :whistle:
1to2ew.jpg


And the larger size with 12 holes and tritium GITD an IceBlue 6 trit focus adapter.

and a yellow one, please realize the trits are very hard to get a picture of
and they look much better in person ;)

A blacked out 30Cal. on a C-1 assult host

A blacked out tripple trit on a C-6 host

Green and Yellow 5mm trits.


This one is called TritiumStarr and has 8mm IceBlue and 5mm Green trits.


Blacked-out This one fits a C6 host.


And then there are GITD styles in Orange, Blue, Yellow, Violet, Red, Green.
My camera dose not due the Yellow, Violet or Green justice they look much better in person, all of them look much better in person.
In full light.


Under black light with a dim back light.


With dim back light only.


This is a HA-III host with a copper heat sink and polished aluminum focus adapter.


And The Bullet :eg:

A long or short guy for those who want it smaller, the size can be adjusted some to fit your build.




As you can see it's approx the height of 3 to 4 standard Aixiz focus rings, of course if you state so when you order I can make it shorter or longer.



They are $7.50 each :D

Aluminum Bullet FA


Copper Bullet FA $9.00


And there are Flat polished copper ones ;)


xx09.jpg


Cu FA 13.1mm $8.00


Cu FA 15.2mm $9.00


Cu FA 16.3mm $9.00


Cu FA 18.2mm $10.00


Cu FA 45.8mm $20.00



A new one called NEBULA


Please contact me for other sizes.

Check out this link to my other items> http://laserpointerforums.com/f39/flaminpyros-stuf-67118.html#post966672
 
Last edited:





Would be nice if they were textured for grip like the ones Jayrob has.
 
a lathe with a textured wheel is just pressed against it it only takes a few seconds. i sure if he has the tool he can do it.
i do like the dome look.
Kinda off topic but i have a 50cal bullet that i have always wanted to make into a laser. can someone machine out the bullet to hold the lens? and put a hole threw it?
And how much would it cost me?
I think that would be soo cool to be holding a bullet then the blue beam comes out.
http://en.wikipedia.org/wiki/File:50_bmg_12.7x99.PNG
 
I would put it in a lathe, but then I would run away before the lathe got anywhere near cutting it :D
 
Nice stuff!! Whats the last pic host? Aurora? I havent seen that one.
 
That host is the WOLF 800 it's a double 18650 cell host so it has the power to last all day long ;)
A new FS thread has been submitted and will be out as soon as one of the moderators decices to do a little work and put it up in the Pro Shop :can:


Nice stuff!! Whats the last pic host? Aurora? I havent seen that one.
 
Those are GREAT lookin' focusing rings F-PYRO, but I agree that you do need a knurling tool so one can get a good grip on the F-RING. I REALLY like the one that has the extra holes drilled in it. Looks SPACEY !!!
 
I have a knurling tool but find it's realy not needed, in some cases I like the looks of knurling and it dose have a function but for the look I am going for it's a distraction. I have no problem focusing with a smooth focus ring, and the holes make it a sure deal.
Now if you want knurling all you have to do is ask and I will provide you with what ever you like ;)


Those are GREAT lookin' focusing rings F-PYRO, but I agree that you do need a knurling tool so one can get a good grip on the F-RING. I REALLY like the one that has the extra holes drilled in it. Looks SPACEY !!!
 
I have a knurling tool but find it's realy not needed, in some cases I like the looks of knurling and it dose have a function but for the look I am going for it's a distraction. I have no problem focusing with a smooth focus ring, and the holes make it a sure deal.
Now if you want knurling all you have to do is ask and I will provide you with what ever you like ;)

I agree with that. If your focus ring is so bound up that you need knurling to turn it then you have bigger problems than not being able to get a grip on the ring :crackup:

But some knurling in certain places looks pretty cool!
 
I look at those nice pieces of metal and start wondering if the 9x0,5 lens nuts are available in metal? That would make the focus ring part of the heatsinking. :)
 
I look at those nice pieces of metal and start wondering if the 9x0,5 lens nuts are available in metal? That would make the focus ring part of the heatsinking. :)

All of the "high end" lenses are metal.
 





Back
Top