First PS3 blu-ray match light video (I think)

[GooeyGus]

Here it is... I was pretty excited when it actually went

[media]http://vid269.photobucket.com/albums/jj71/GooeyGus/Bluray.flv[/media]

 

[Switch]

YEEAAH!

That must pack quite some power.One of the freaky ones ;D

 

[jake21]

cool mine pops balloons at 6ft havent tryed matches yet

 

[Hemlock_Mike]

OK Gus -- What was the mA current?  I did that too with the first GB  ;D

Good work but now get back to reality and 38 mA !!!  The blue can be focused to a pinpiont for this fun but watch the current.  Mine lasted 15 minutes till the LED grave. I was running 45 mA and getting 16 mW.

Mike

 

[MB500]

Here's a guy who did it: http://www.youtube.com/watch?v=CQnE1BkZAW4

 

[styropyro]

OK Gus -- What was the mA current? I did that too with the first GB ;D

Good work but now get back to reality and 38 mA !!! The blue can be focused to a pinpiont for this fun but watch the current. Mine lasted 15 minutes till the LED grave. I was running 45 mA and getting 16 mW.

Mike

I just lit a match with a blu-ray at 39.6mA, I think I'm gonna leave it there. I busted the pins off on accident so i have to hold the wires in place, I just can't solder new pins on!

 

[GooeyGus]

OK Gus -- What was the mA current? I did that too with the first GB ;D

Good work but now get back to reality and 38 mA !!! The blue can be focused to a pinpiont for this fun but watch the current. Mine lasted 15 minutes till the LED grave. I was running 45 mA and getting 16 mW.

Mike

Mine has been through about 3 9v batteries at 50mA. I keep waiting for it to die but it just keeps on truckin. No yellow in the spot at all, and no evidence of damage when I look at the spot unfocused on a wall. Its the little diode that could.

EDIT: I wanted to add that I haven't measured the actual current. It has a 100ohm pot (set all the way open) and a 25ohm resistor. I did the math and came up with 50mA, my new DMM should be here soon so I can get some actual numbers.