Hi, can anyone tell me if i can use one 1 ohm resistor, 2 1n4004 diodes, and 4 1n4007 diodes to create test load for phr 803t. Im asking this because i cant get any 1n4001 diodes in Croatia. Thx for your help...:bowdown:
Btw drew can u test it if u have proper dummy load. You know, connect proper dummyload, and measure the v and ma, then make one from 4 4007 and two 4004 and 1ohm resistor and then measure again to see if its same. Ofcourse, if u have these diodes.
Thanks!
All 1N400x diodes have the same voltage drop (within a few mVs), the last digit refers to the breakdown voltage of the diodes. So yes, you can mix and match.