Dorcy Jr. LOT for sale!

[MrDusanMandic]

I have the following Dorcy Jr. items for sale / trade.

2 x ehgmus Dorcy Jr. OLD STYLE heatsinks. I got these from ehgmus not too long ago and they have just been sitting. These fit the OLD STYLE dorcy jr. units.

3 x Dorcy Jr. flashlights still in the package brand new (Old Style)

1 x Dorcy Jr. flashlight with the guts removed (Old style). Yes, I still have the guts and can probably put them back in the unit, I can at least include them with the unit.

I'm open to trades / offers.

 

[Morgan]

Some photos may help here...

M

 

[MrDusanMandic]

I'm at work, when I get home I'll post some pictures of everything.

 

[Mohrenberg]

Dorcy Jr. FTW

 

[Elektrotechniker]

Dorcy Jr. FTW

WOW, just WOW.. awesomeness

 

[MrDusanMandic]

NO offers?!?! What has LPF come to!?!? Somebody has to want these bad boys. 4 units total and 2 heatsinks, these things are ready to go!

 

[Elektrotechniker]

Well you can always consider giving them away to me for $20 shipped( everything )




J/k
I am saving up for something else.
Free bump btw, some1 get these hosts!

 

[bloompyle]

Well, I need some hosts, but I'm broke, I get $20 a week, so, if you can hold out long enough, or not....you probably want more though. So....$40 in a week and a half ok for one/two

 

[MrDusanMandic]

How about $80 for everything with Overnight shipping?

 

[daguin]

How about $80 for everything with Overnight shipping?

I'll trade you a new red burner in a Dorcy for the lot (overnight shipping is not needed)

http://laserpointerforums.com/f39/daguins-epic-sale-48162.html#post655398

THE RED BURNER IS STILL AVAILABLE
Number 10 is a red burner. It has an LCC diode. The driver is set at 420mA. It is putting out 250mW with the stock acrylic lens (supplied). If you get one of Jayrob's 605-G-1 lenses, it puts out 295mW!
Number 10 is $85


Sorry. The red burner just sold.

How about a couple of red burner modules?
Items 12 (A, B, C, D, E) are red burner modules. These have an LCC diode. They have the new Groove 2 driver, set at 425mA. They are putting out 250mW with the acrylic lens (supplied). If you get one of Jayrob's 605-G-1 lenses, they are putting out 300mW. These will need 6V-12V power source and heat sinking. These modules are $40 EACH

OR

I'll give you the $80 in credit on any other purchase

Peace,
dave

 

[gloryofblaze]

do you stillhave the dorcy hosts? Heatsinks incl? How many do you have?

 

[MrDusanMandic]

Yes, I still have everything. I have 3 hosts still brand new in the package and one host that has been opened and gutted, but I still have all of the guts and can put it back together.

I also have 2 ehgmus heatsinks with the set screws.

Daguin - I'll take a peak at your sale section and let you know what catches my eye.

 

[MrDusanMandic]

Daguin, I'm interested in a couple of the red burner modules. Do you have any empty 18650 hosts I might be able to get off you? If I got these modules from you, I'd have nothing to put them in.

 

[daguin]

Daguin, I'm interested in a couple of the red burner modules. Do you have any empty 18650 hosts I might be able to get off you? If I got these modules from you, I'd have nothing to put them in.

The only 18650 hosts I have on hand are Kryton Grooves. However, you cannot use these modules with a single 18650. These have the Groove2 driver (linear). They are going to need a minimum of ~4.5V to even operate the laser. A fully charged 18650 (4.2V) MIGHT light it up, but it would only last a few minutes before the voltage sagged below the threshold. It would be better to run these with ~5-6V.

Peace,
dave