Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

DIY laser question

Joined
Jun 24, 2009
Messages
88
Points
0
I have been wondering if you could put together a laser like this:

First you have the front end of the module with the diode.No heatsink.Then you have the driver sodered onto the diode.Then you have the other end over the module covering the driver.Next you have the power supply connected to the driver by wires.?
 





Joined
Dec 1, 2008
Messages
878
Points
28
I have been wondering if you could put together a laser like this:

First you have the front end of the module with the diode.No heatsink.Then you have the driver sodered onto the diode.Then you have the other end over the module covering the driver.Next you have the power supply connected to the driver by wires.?

Is there a question here?:na:

But seriously, It seems like you haven't done any reading around here yet. Try searching the forums, there is allot to learn here.
 
Last edited:
Joined
Dec 23, 2008
Messages
3,948
Points
63
momo... i try to tell the new people..... you can read all the noob bashing in a thread you create. or you can read instant and good info by searching... :thinking::whistle:
 
Joined
Apr 1, 2008
Messages
3,924
Points
0
The SEARCH BUTTON is your friend, is a saying here on this Forum. It was created by a VERY WISE INDIVIDUAL & popularized by MANY. VERY SAGE WISDOM if followed correctly................rob..............PS, Give RESPECT & RESPECT will be returned, just remember that RESPECT is earned, not given with ones Forum Membersship!!!!!!!!!
 

k1kb0t

0
Joined
May 12, 2009
Messages
454
Points
0
Momo searching includes looking in different forum sections. Sometimes when we are new we don't know what term to use in search. The information is definitely here, try looking at the stickies in different sections.

Jon
 




Top