Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

DIY 445nm pointer






DrSid

0
Joined
Jul 17, 2010
Messages
1,506
Points
48
You missed heatsink and battery. Both can cost significant amounts of money. And that is the very minimum. Generally you will also need host, and switch .. both usually come in form of LED flashlight.
 
Joined
Apr 5, 2011
Messages
1,161
Points
0
And I guess you consider the most important, the goggles :)
 
Last edited:

wall

0
Joined
Aug 1, 2011
Messages
55
Points
0
You missed heatsink and battery. Both can cost significant amounts of money. And that is the very minimum. Generally you will also need host, and switch .. both usually come in form of LED flashlight.
Thank you for all the quick replies. As I already said I only own one laser pointer which I bought assembled from DX. I thought the aixiz module was a host and also act like a heatsink. And doesn't the driver already have a switch? Thank you.
 

wall

0
Joined
Aug 1, 2011
Messages
55
Points
0
As for the battery I plan on using one 18650, or would 2xCR2 be better?
 
Joined
Apr 5, 2011
Messages
1,161
Points
0
You can not put 2 CR2 in series because the driver accepts only 4.2V maximum.

You have to think that when you buy the host, what type of battery accepts, and if the battery voltage is good to your driver.
 

wall

0
Joined
Aug 1, 2011
Messages
55
Points
0
Oops forgot flashlight hosts can't do parallel batteries. And about the aixiz module, is it suppose to go inside a host? Where does the heatsink go? Sorry for all the dumb questions.
 

wall

0
Joined
Aug 1, 2011
Messages
55
Points
0
The more I read about DIY pointers the more confusing it gets. How much would it cost to order an already assembled pointer with a A140 diode on a 18650 host, inc shipping to Portugal?
 




Top