Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Laser Pointer Store

Disassembling O-like gatlin 532nm

Cel

Active member
Joined
Jan 28, 2012
Messages
749
Likes
92
Points
28
Howdy LPF! :beer:

I have one O-like gatlin for more that a year. It was cca. 100$ (a bit overpriced, but really nice host).

And I decided to... disassemble it! :eg:
(And reassemble it after that, no damage made :angel:)


Here it goes:



The gatlin:






Tailcap detail:




Aperture/focus ring detail:






Barrels detail:






Reloading the gatlin (battery):





Disassembly:


Tools you need


Tweezers and hex wrench (3mm IIRC)

Procedure:

Remove the tailcap:






Use tweezers to unscrew the part of the tailcap that holds the button:




You will get this:




Use the hex wrench (Allen wrench) to unscrew these little screws (but from the tail side of the laser, not the front):



Do that 12x and get this:




Now, pull the back part while holding the front part of the gatlin:







You will get this:





And this:






I tried to put the battery in and turn it on, and this is what happened:







Now remove the screws from the front of the laser:



Pull out all barrels (12x):





Done!



Parts of the gatlin:




You can combine the front and the tail part of the laser, without using the barrels, to get this:



End



I hope you enjoyed this little tour!

Cel
 
Last edited:

Haloid95

New member
Joined
Apr 5, 2011
Messages
917
Likes
32
Points
0
When I first got into lasers I always wanted one of those. But it was expensive and always out of stock. Good guide and nice pictures +1.
 




Top