GooeyGus
0
- Joined
- Mar 8, 2008
- Messages
- 2,669
- Points
- 48
****PRICE DROP.... GO TO LAST POST****
Hi everyone,
I'm selling my Nd:YAG rod along with optics meant for high power 532nm.
The rod is 1.1% doped, so it could be used CW with good cooling or pulsed. It's AR/AR 1064nm coated. I believe it's about 3mm x 55mm long. One can make some SERIOUS power with this rod. I believe the rod was meant to be pumped by four 'CCP' style diodes, two on each side.
The optics are very thick, high quality optics meant to make a lot of 532nm. The HR mirror is coated for HR 1064/532 and the OC is coated for HR1064 HT532 on one side, and AR 532nm on the other side. I'm not sure of the exact ROC on the OC mirror, but I do know they are designed for a ~25cm cavity length.
The HR mirror has a chip on the back side of it. This chip is NOT on the coated side and in no way will effect its performance.
I'll get some pictures posted very soon!!
I was intending to use this stuff for a high power green, but I really just dont have the time to give this project the attention it needs.
This setup could easily make several watts of green if built correctly!
Looking for $200 price drop, $150, open to trades
Hi everyone,
I'm selling my Nd:YAG rod along with optics meant for high power 532nm.
The rod is 1.1% doped, so it could be used CW with good cooling or pulsed. It's AR/AR 1064nm coated. I believe it's about 3mm x 55mm long. One can make some SERIOUS power with this rod. I believe the rod was meant to be pumped by four 'CCP' style diodes, two on each side.
The optics are very thick, high quality optics meant to make a lot of 532nm. The HR mirror is coated for HR 1064/532 and the OC is coated for HR1064 HT532 on one side, and AR 532nm on the other side. I'm not sure of the exact ROC on the OC mirror, but I do know they are designed for a ~25cm cavity length.
The HR mirror has a chip on the back side of it. This chip is NOT on the coated side and in no way will effect its performance.
I'll get some pictures posted very soon!!
I was intending to use this stuff for a high power green, but I really just dont have the time to give this project the attention it needs.
This setup could easily make several watts of green if built correctly!
Looking for $200 price drop, $150, open to trades
Last edited: