Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Custom 900 Lumen Maglite - Made to order - Sell or Trade

Joined
May 10, 2010
Messages
105
Points
18
Maglite is universally recognized and accepted as being of the most rugged, durable, and simplistic flashlights in the world. Unfortunately, Maglite is not know for its outstanding light output; just about 75 lumens. That is where I come into play.

What I have here to sell is a custom 900 lumen Maglite. consists of a P7 LED, custom lathed heatsink, custom driver, custom reflector etc. 900 lumens is about the same amount of light that is outputted from a standard car headlight. Runs on standard D cell batteries. Still retains its focus ability, and is still water resistant. From the outside it still looks like a regular Maglite, but packs a powerful punch.


--- All Maglites are custom hand made to order. I use 24 gauge Teflon coated wire. And P7 LED's are the most recent bin (DSWOI bin), and are properly heatsinked, and thermally managed using Arctic silver, and Arctic Alumina Epoxy. ---

The LED itself is called a P7. It is made by the company SSC. It produces 900 Lumens @ 10 watts. With an efficiency of 90 Lumen's per watt. Making it one of the brightest, and most efficient LED in the world. That is 4 times as efficient, and 12 times as bright as a typical
krypton bulb found in a standard Maglite.


Available in MOP reflector (Medium Orange Peel). It diffuses the light and makes the hotspot more spread out, witch is great for close quarters.
With a standard smooth reflector, the hotspot is smaller and more intense, that is good for throw (long range light).


This Maglite is regulated using a custom driver w/ x8 7135 chips at a max output of 2800milliamps. I can set up your Maglite with either of the following mode sets (2D, 3D or 4D)
for no extra charge:


  1. Hi
  2. Hi, Lo
  3. Hi, Med, Lo
  4. Hi, Lo, Strobe
  5. Hi, Med, Lo, Strobe, SOS

*Modes can be changed linearly using the original switching mechanism when pressed fast.


Benifits of LED technology:


  • Long life – These lights can last from 50,000 to 100,000 hours. Incandescent light bulbs typically last around 1,000 hours and fluorescents are good for roughly 10,000 hours.
  • Rugged durability – LED lights have no fragile filament to contend with, and no fragile tube. They are resistant to heat, cold, and shock.
  • Lumens per watt – While manufacturers are still finding new ways to increase this ratio, Cree Inc. has been able to produce an LED bulb that generates 160 lumens/watt. Today's available LEDs average around 50 lumens per watt. The P7 LED averages 90 per watt. Incandescent bulbs wander sadly in at about 15.
  • Generates low heat - LED's generate far less heat than conventional incandescent bulbs. So much so that you can touch the LED after its been on for an hour.
  • Compact size - This may not seem like a plus, but when the light is emitted from a tiny point, it can be focused more precisely. Allowing it to throw like a spotlight. And give a nice artifact-free pattern.
  • Pure white - AllL ED's are capable of emitting pure white light. This P7 LED emits 6050K color temperature. For an LED, that is white. The P7 is also available in 6500K, (bluish tint).
  • Read more at Suite101: The Benefits of LED Lighting: Light Emitting Diode Bulbs are Energy Efficient and Long Lasting The Benefits of LED Lighting: Light Emitting Diode Bulbs are Energy Efficient and Long Lasting



Finally, here are some pics with standard smooth reflectors

mceandp7.jpg




Here is a pic of the P7 in the Maglite with an MOP reflector


3n13of3p75T55P55R3a4ea669d9a7ec411fa4.jpg





Here is a beamshot of a stock Maglite (left), compared to a P7 Maglite (right).


img01391.jpg


And here a beamshot of a P7 Maglite shined onto a house using an MOP reflector.


3m93p23l65Q05P65S0a4e9c683cd35b23112b.jpg



If you would like a color other than black, you can choose from any of the below colors or patterns.


5724.jpg
.
5725.jpg
5726.jpg
5727.jpg





I will try to get beamshot comparisons between all of the above flashlights. I can't hold onto these flashlights for more than a day before they have to be shipped off to the customer, so its hard for me to get them all together for a photo opp. I am currently in the process of sending all the above flashlights to Dave (Daguin) to be thoroughly reviewed. I'm looking for another highly reputable member of LPF to do another review. If you feel you meet qualifications, let me know.



PRICE:

$150 for 3D or 3C Maglite

$160 for 4D or 4C Maglite

$165 for 5D or 6D Maglite

KEY:
number = how many cells the Maglite requires
letter = type of battery

Example: 3D Maglite = Three D sized batteries.


---------------------

$15 for MOP reflector (SOLD OUT UNTIL SEPTEMBER)

$10 for "glow ring", $15 for two

----------------------------

I'm located in West Orange County if you wanted to deal locally.
Or if you want to take a look at it.

Contact me via PM or E-mail at pentolite@gmail.com

I'm aware that I have a low post count, low rep, and recent registration date. I'll be willing to use a moderator for sell or trade.













I'll post more pictures up soon.













:can: let there be light!
 
Last edited:





It's very important for you to POST prices and pictures of your work!!! Show us what you are trying to sell/trade.You have just joined LPF and have 0 rep, so you, more than likely will have to use a bonafide trusted member to act as your middleman, if someone here likes what you have to offer and wants to do business with you. Other than that, "Welcome" to the LPF.
 
Those prices aren't bad, assuming you build them properly. Can I suggest that you send a review unit to another trusted member, so they can make give it a thorough review, and then they return it. If the review is positive, then you will get lots more sales.

Rob
 
I would seriously consider this. Can you recommend anyone? Like Jayrob?

Maybe somebody in the Orange County area
 
Last edited:
If someone can confirm build quality and reputation, I definitely want one.

How far do these throw?

-Trevor
 
If someone can confirm build quality and reputation, I definitely want one.

How far do these throw?

-Trevor

The picture with the house shows its throw with an MOP reflector, meaning the throw light is diffused for flood. With the original reflector you should get a very nice hotspot. I would guess at 400ft the hot spot would be as big as 10-15ft in diameter. I'll get more pictures of beamshots up shortly.
 
Last edited:
I have recently bought a 1000lumen MflaRe! That is one SWEET light! But anyhow, how much for the triple p7 at 2700 lumens?
 
I have recently bought a 1000lumen MflaRe! That is one SWEET light! But anyhow, how much for the triple p7 at 2700 lumens?

I charge $300 for the triple P7 Maglite without batteries/charger. And that is a very generous price considering each P7 LED costs $25 a piece.

you will need 4-5 lithium ion cells to power it. I have used four AW 26500 cells.

Are these the C-bin p7's?

No, these are D bin P7 LED's. Currently, the highest bin for P7

the bin code is W724C0-DSWOI

and technical specs are:

800 - 900 lumen output at 2.8A
Color bin SW0: 6050K
Vf bin I: 3.25 - 3.50V

I also have available DSXO bin.


:D
 
Last edited:
you should sign up on there and get some good ref. that'll do great for your biz. I'll have to keep you in mind though.
 
Do you have images of the "innards" AT?

I'd like to see the HS and reflectors on the tri 7 if possible.

Thanks in advance,
Ray
 
Some pictures of the innards would be good indeed... you have to dissipate a serious amount of heat in this application.

I suppose this sale is more suitable for CPF anyway - but who knows if anyone here wants a power upgrade for their maglites.
 


Back
Top