Greets all,
I am finding a desperate need for space, and have zero time for tinkering since our new addition to the family arrived 2 weeks ago.
I am considering selling off the huge Coherent Innova 20 laser I got a while ago.
Since buying it a few months ago, I have tested the individual modules/sections, repaired some minor faults and done the recommended maintenance.
I also bought (from US ebay) nearly all the parts (except tube, plumbing, chassis and transformer) from the later model microprocessor controlled innova 200 (basically the same thing, but with full micro control and LCD remote control head, which I also have). Idea was to patch in the new microprocessor control system after getting the original setup working.
I also got every part of the optics as well, so a complete spare set of HR/OC, mounts, adjusters, laser power meter, etc, etc. Checked, and these are compatible.
I also bought the Innova 200 user/service manual, with schematics. This is almost identical to the innova 20 schematic.
Additionally, the laser head has its original custom-designed Coherent shipping crate and all the padding/shock absorbing stuff.
Anyway, I've run out of steam at the point of getting the 3 phase 415 volt, 40 amp outlet fitted here at work to do the final laser output test.
This is DEFINITELY NOT something that can be mailed, or even easily couriered, so pick up would be needed from Richmond, Victoria, Australia.
Any interest here before I look at fleabaying it?
Cheers,
Pete
I am finding a desperate need for space, and have zero time for tinkering since our new addition to the family arrived 2 weeks ago.
I am considering selling off the huge Coherent Innova 20 laser I got a while ago.
Since buying it a few months ago, I have tested the individual modules/sections, repaired some minor faults and done the recommended maintenance.
I also bought (from US ebay) nearly all the parts (except tube, plumbing, chassis and transformer) from the later model microprocessor controlled innova 200 (basically the same thing, but with full micro control and LCD remote control head, which I also have). Idea was to patch in the new microprocessor control system after getting the original setup working.
I also got every part of the optics as well, so a complete spare set of HR/OC, mounts, adjusters, laser power meter, etc, etc. Checked, and these are compatible.
I also bought the Innova 200 user/service manual, with schematics. This is almost identical to the innova 20 schematic.
Additionally, the laser head has its original custom-designed Coherent shipping crate and all the padding/shock absorbing stuff.
Anyway, I've run out of steam at the point of getting the 3 phase 415 volt, 40 amp outlet fitted here at work to do the final laser output test.
This is DEFINITELY NOT something that can be mailed, or even easily couriered, so pick up would be needed from Richmond, Victoria, Australia.
Any interest here before I look at fleabaying it?
Cheers,
Pete
