Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Laser Pointer Store

Any one here own Spyder III and JetLaser PL-E Pro ?

cptroost

New member
Joined
Sep 2, 2014
Messages
28
Likes
0
Points
0
Hi guys, im new here, please dont bash me..... :D

I have been drawn to lasers, and have been reading on this forum for a couple of months now. Everyone here sound like GREAT people! Not only great but really knowledgable on the subject.

To start off, i am purchasing a 500mw Krypton, and am thinking of purchasing the JetLaser PL-E Pro 4W 445nm Focusable..

I was wondering, if there would be any way that the WL EXPANDER LENS KIT could be used with the JetLaser PL-E Pro? is the tip of the Jetlaser screwable?

Im sorry if its a dumb question....

Anyways, nice to say hi to you all.
 

Joined
Aug 24, 2014
Messages
62
Likes
12
Points
0
Hi! Welcome to the forum!
The krypton? The wicked lasers krypton 532nm that's $700?

Have you already bought the laser? I would do some searching on the forum to learn about wicked lasers before you buy from them. They look great but are extremely over priced for what you are getting. I've read they are known for scamming quite a few people as well with less mW then you buy.

I'd recommend buying from someone on the forum for better quality at great prices.
 
Last edited:

SilverFire

New member
Joined
Aug 23, 2014
Messages
486
Likes
33
Points
0
Welcome to the forum!
And I see you like the Wicked Lasers Krypton. I know the design sure looks cool but if you didn't buy it yet, I would recommend the Spartan 600mW green laser from Dragon Lasers for $400. Its much cheaper with more power and dragon lasers is a trusted site and recommended by laser hobbyists all over the forum. I like the look of Wicked Lasers too but they overcharge on a lot of their products. And on the expander kit, I'm not exactly sure if it will fit or not. I've never owned those lasers. It's up to you man! And I hope you enjoy your time on the forum and get all the information you need!
 
Last edited:

hakzaw1

Well-known member
Joined
Apr 2, 2009
Messages
9,285
Likes
1,389
Points
113
or FIND A JETLASERS 532 GENTLY used for less..

OR build or have a friend build you a 800--mW green diode handheld using the new DTR 9mm (iirc) green diode for $395 (diode only)


I know about some JLs that may be FS==PM me if you want


edit update
this newcomer may find few willing to ship to him.. a member cannot afford to replace one- his best bet will be JL - and be OKay to pay for the best carrier express and insured- for the max.

cant ever remember a member from Guatamala--

I sometimes forget how lucky I am to be here...

And THAT remids me that we may soon have a big problem with our lasers in the USA
 
Last edited:

cptroost

New member
Joined
Sep 2, 2014
Messages
28
Likes
0
Points
0
Thank you guys for the responces and recommendatios.

The only reason why i am willing to purchase the OVERPRICED WL Krypton, is because of the Extra things the other ones dont have. Since this is my first one, i would like all the little gadgets one can add like: Lines, X, Dots, etc... Also the Operating Modes (Strobe, Constant Wave, SOS, Beacon, Tactical) wich is kind of cool...

Theses other ones dont have this right?
 

cptroost

New member
Joined
Sep 2, 2014
Messages
28
Likes
0
Points
0
Hi guys! Just a little update!

I know most have a bad impression of WL, i sent them an email, told them to look for the Highest rated KRYPTON 500mw+ they have, for the same price obviously and pick it up and send it to me... They stated that they would do that, put a note on my order, so that warehouse would pick up one with 700-800mw range...

Lets see what happens... :wave:

Alldough, LOL, here locally i do not have the slightest clue who could rate the mW for me... alldough WL sends a personalised graph or something... hmmm
 
Last edited:
Joined
Dec 6, 2011
Messages
46
Likes
6
Points
0
You can also ask some helpful vets here to do the LPMing for you.
They should be willing to help.
Hi guys! Just a little update!

I know most have a bad impression of WL, i sent them an email, told them to look for the Highest rated KRYPTON 500mw+ they have, for the same price obviously and pick it up and send it to me... They stated that they would do that, put a note on my order, so that warehouse would pick up one with 700-800mw range...

Lets see what happens... :wave:

Alldough, LOL, here locally i do not have the slightest clue who could rate the mW for me... alldough WL sends a personalised graph or something... hmmm
 

hakzaw1

Well-known member
Joined
Apr 2, 2009
Messages
9,285
Likes
1,389
Points
113
Thank you guys for the responces and recommendatios.

The only reason why i am willing to purchase the OVERPRICED WL Krypton, is because of the Extra things the other ones dont have. Since this is my first one, i would like all the little gadgets one can add like: Lines, X, Dots, etc... Also the Operating Modes (Strobe, Constant Wave, SOS, Beacon, Tactical) wich is kind of cool...

Theses other ones dont have this right?
some sell a model called 'Rifle' which comes in a nice case- has the right glasses for blue and several ttips with the same gratings- 1W is PLENTY and these are $200 from one seller and shipped from TEXAS as far as the 'specail treatment' they seem to offer.... anyone writing gets the same promise --

IF you want a rifle I can arrange PPal invoice and use MY LPM to make and send along a graph-- shipping will not be cheap as this needs max insurance and express to increase chances for safe & unopened delivery-- no batts will be shipped with-- Not sure what it needs- IIRC it takes two 16340s so you get >7 vdc as most blues need the same.


Hi guys! Just a little update!

I know most have a bad impression of WL, i sent them an email, told them to look for the Highest rated KRYPTON 500mw+ they have, for the same price obviously and pick it up and send it to me... They stated that they would do that, put a note on my order, so that warehouse would pick up one with 700-800mw range...

Lets see what happens... :wave:


ONLY with a meter can you 'see' any differene between 500 and 700-

to 'double' brightness of a 500mW ( by eye) it takes 2000mW


BUT ATM it looks like you have already paid WL

'THE MOST HATED LASER MAKER/SELLER IN THE WORLD'







Alldough, LOL, here locally i do not have the slightest clue who could rate the mW for me... alldough WL sends a personalised graph or something... hmmm
 

cptroost

New member
Joined
Sep 2, 2014
Messages
28
Likes
0
Points
0
some sell a model called 'Rifle' which comes in a nice case- has the right glasses for blue and several ttips with the same gratings- 1W is PLENTY and these are $200 from one seller and shipped from TEXAS as far as the 'specail treatment' they seem to offer.... anyone writing gets the same promise --

IF you want a rifle I can arrange PPal invoice and use MY LPM to make and send along a graph-- shipping will not be cheap as this needs max insurance and express to increase chances for safe & unopened delivery-- no batts will be shipped with-- Not sure what it needs- IIRC it takes two 16340s so you get >7 vdc as most blues need the same.
Cool.. do you have any pics?
 

hakzaw1

Well-known member
Joined
Apr 2, 2009
Messages
9,285
Likes
1,389
Points
113
just this review by another seller- the host- color and ectras except batteries are what I can get for you- wont know the actual price or power until i go and see(soon) at the end you see the improvement the G lens makes- I will do my best to have yours comes with the same lens--

the attachment gratings are far better that what we see with coin batt red cat toys- they have two that counter rotate- -- Not sure what all powers these come in-
my friend had ten and one was given away last year at SELEM--

http://laserpointerforums.com/f52/r...focusable-445nm-blue-laser-package-85099.html
 
Last edited:

EpicHam

New member
Joined
May 17, 2013
Messages
1,022
Likes
60
Points
0
Let's do a break down eh?
Do you know where Wicked Lasers's lasers are made?
They are made in China just like everyone else , as someone who LIVES in China I can tell you the workmanship difference caN REAALLY wildly vary.
A dollar paid is not a dollar received.

Now I don't personally own a WickedLaser so it would be unfair for me to judge, but from the over 3 years of buyer experience documented on LPF , WickedLaser's reputation is a bit... charred to say the least.

There are many other lasers manufacturered and sold by more reputable companies.
Such as JetLaser , which is jointly operated by one of our forum members .
CNI , Dragon Laser - which uses the same manufacturing plant , Dragon laser allegedly gets the best batch , you be the judge.
LaserGlow , TOP of the line VERY expensive stuff , it's the Rolls Royce of portable lasers.

If you're into just the color but not the DPSS process , you can always opt for custom built lasers built by the many lasersmiths on the forum .
the 520nm diodes are quite a bit more sturdy than the 532DPSS modules so there are choices here.
 

cptroost

New member
Joined
Sep 2, 2014
Messages
28
Likes
0
Points
0
Hello,
than you for your kind repplies...

Surfing through this provider LAZERPOINT.COM... doesent really seem that they know much.. check out these Questions and Answers...

2000mw 532nm Adjustable for US$ 130.29 ?? ....

In the Q&A, the confirms that the output is 2000mw..

1. Is this really 2000mw (2 watts) or 200mw? (I.e., a misprint.) 2. Do I need blocking glasses when I use this? 3. Is extra cooling necessary? THANKS!


05/01/2013 by pgphillips
Answer now
Dear , it's 2000mw . If you want to a glasses , you can search 3395496 . Thanks .
Answered on 05/02/2013 by Lazerpoint


Lazerpoint
 

KrowBar

New member
Joined
May 3, 2014
Messages
128
Likes
13
Points
0
If you want to a glasses. Best lazer pokers for more to the 5000 watts is bringing you high qualities today. Sounds like a winner.
 




Top