Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Laser Pointer Store

Aixiz vs. Sure modules

ndrew2505

New member
Joined
Feb 23, 2008
Messages
2,824
Likes
79
Points
0
anybody got one of each that can do a direct comparison? just wondering what the specific differences are..if any..
 

styropyro

New member
Joined
Jun 13, 2007
Messages
5,385
Likes
477
Points
0
I hear the Sure modules are shorter than the Aixiz modules and that they are too small to fit a rkcstr driver in.
 
Joined
Nov 7, 2008
Messages
5,728
Likes
281
Points
0
The Sure modules are about 2.5mm shorter than the Aixiz. With the Sure modules, in the part that holds the collimating assembly the threads don't extend quite as for down as the Aixiz. Also, the opening that you press the diode into is recessed in the Aixiz modules. This is not so with the Sure. These are the only three differences that I've seen..

Here's a pic that shows the length difference:


The Sure has the sticker on it.

Obviously using a Sure with a rkcstr driver presents problems..

(phone camera = crappy quality.. sorry)
 
Joined
Mar 25, 2008
Messages
1,008
Likes
15
Points
0
I'd wanna see what you mean by the recessed part lol. If it's not recessed, how does it get press-fitted in?
 
Joined
Nov 7, 2008
Messages
5,728
Likes
281
Points
0
What I mean by recessed is in an Aixiz module, the diode gets pressed in until it is slightly recessed past the surface. In the Sure module, it only gets pressed until it is flush with the surface. The diode can't go any further. In an Aixiz module there's a slightly beveled edge around the diode opening. This is not present in a Sure module. I'd take another picture, but you'd never be able to see that kind of detail in any picture from my phone..
 




Top