A ton of stuff for sale!!!

[Laser_Ben]

So I have been getting yelled at to clean out the room from all my stuff. Here is the first batch, everything here has to go. If you want it and you don't want to pay what I posted, send me and offer via PM. Please do not post here making offers.

Policies:

1. YOU PAY SHIPPING
2. YOU PAY Insurance if you want it
3. I make describe everything I am selling the best I can. You will recieve what is described

And here is the list...

1. Fluke PM3380A Digital Auto ranging Oscilloscope needs a diode replaced replacement diode is included $75

2. Tektronix 2215 60MHz Oscilloscope Works Perfectly $120

3. Tektronix 2430A Digital Oscilloscope with GPIB Needs screen adjustment $75

4. Tektronix 466 Storage Oscilloscope Works Perfectly $100

5. LeCroy 9400 125MHz Digital Oscilloscope 5V power supply has a problem $100

6. HP 10400A Miniature Passive Scope Probe 10x 350MHz new with all accessories including replacement tip and clips $50

7. Coherent Compass 115M-5 532nm 5mW laser SLM Long Coherence Length with 2 controllers $150

8. Tektronix P6101A 1x scope probe new $25

9. UV ND1.5 Filter ~1.5” OD $15

10. Coherent Fiber Coupler $30

11. Coherent Gold Mirror for Er: YAG but will work with any IR $15

12. 1” Diameter LAKN22 Blank $10

13. Pack of 25 Helium Neon OC mirrors 100cm x 31cm 7.75mm only sold together $50

14. Thermawave Bandpass filter passes everything below 700nm $15

15. Optical Grade Silicon blanks 1” diameter 6mm thick $10

16. Lumenis YAG laser OC mirrors several available $25

17. 500mm FL lens AR for Visible Several Available $10

18. 1.125” Diameter Germanium Lens for FLIR camera $25 1 Sold 3 Available

19. BBO Crystal Blanks VERY LARGE 20.06mm diameter 8.89mm thick 1 cracked $100 each

20. 8mm diameter 532nm HR $10

21. 532nm Wave plate from Coherent Verdi in Aluminum rotating mounts $25

22. Large Coherent prism AR visible $20

23. Small Coherent Right angle prisms. Small amount of epoxy $10 each

24. Visible grating from spectrometer 1.5” square on adjustable mount $25

25. Glass lens collimator for 5.6mm/9mm diode AR @ 660nm $10

26. Coherent Beam Riser from a Verdi Pumped Ti: Sapphire laser raises beam about 3” and rotates 90 degrees $20

27. Coherent D3 430nm Directly Doubled Diode laser system 150 meter coherence length works sometimes $1800 OBO

28. New in Box 355nm Pulsed Laser system with power supply and all cables $200

29. Strange Power Meter built into DMM $35

30. Condor 24V 37.5A power supply $40

31. Small camera system with IR filter XY Adjustable mount and angle adjustable mount $30

32. Anamorphic Prism Pair AR 400nm-700nm $25

33. OD3 Visible Attenuator for Newport detector $15

34. Deans XT high current quick disconnect connectors 10 for $15

35. 125mW 532nm pointer module with driver $50

36. Thermo Electric Cooler $10

37. TIR Luxeon Collimator 6 degree $10

38. Homemade HeNe project Brewster windows and contained ballast resistor

39. Dual HDTV tuner for PC PCI-E 1x brand new $40

40. TI high frequency stable clock pulse generator eval board $20

41. {SOLD} Imageing Source DFK31F03 HD Camera system firewire $35

42. Melles Griot 2-3mW HeNe lasers 05-LHP-211-375 $20

43. Melles Griot 3-4mW HeNe lasers 05-LHP-071-211 $30

44. Toshiba LG-3217 4-5mW HeNe laser exposed $30

45. Uniphase 1105P HeNe laser 5mW $30

46. Dale Qty 50 511 ohm resistors precision $10

 

[robjdixon]

I'll take the 125mw module. I'll pm you later tonight

 

[Alexizupinhea]

I'll take the 125mw module. I'll pm you later tonight

Damn lol, that's what I was gonna take too

 

[Elektrotechniker]

Maybe you 2 should make a bid or w/e lol

 

[FlightLevel350]

Could I see a pic of those deans not connected? I want to make sure they are compatible with my setup

 

[Laser_Ben]

They are compatible with any current deans connectors.

 

[Swordofsalvation]

I am interested in the psu, the tec and the green module. does the psu come with a power cord, and what are its max voltage and amperage?
what is the working voltage for the tec?
and is the 532nm module still available?

 

[Laser_Ben]

There is 1 TEC left. The power supply comes with a cord. It is 24V 37.5A max The max input is 300VAC.

 

[Alexizupinhea]

lol, pic #20 confused me w/ it being in an eppendorf tube. btw, #25 (the 5.6/9mm glass collimator)... so does that basically house a 9mm diode and comes with a collimating lens, or is it just a lens? If it's a blank module w/ a glass lens, I'll probably take it.

 

[Laser_Ben]

#25 is sold.

#20 is a small HR mirror for 532nm. It has 98.5% reflectivity at 532nm.

 

[diachi]

Would you trade the Fluke PM3380A for a thurlby PL320 variable PSU ( 0-30V @ 0-2A ), they usually go for about £50.

 

[primary]

what's the dimension and current for the 125mW module? (same as O-Like ?)
how much use has it seen?

 

[Laser_Ben]

The 2 125mW modules I have are sold and shipped!

 

[charliebruce]

I'm interested in the first 'scope - is there a repair manual, and how large is the commponent? Would it need soldering? I remember you mentioned a manual on a previous F/S thread.

 

[robjdixon]

I can't believe you did that man - I posted first in this thread, and said I would buy one, and The only reason I delayed, was because you gave me a shipping estimate to the USA, instead of the UK like I asked for. Then when I pay, you instantly manage to refund my money and tell me "Sorry, I just got this payment along with another payment for the same item. The other buyer is in the US and thus costs significantly less to ship. Sorry! Ben" It may cost less to ship - that is why I paid you $13 extra on top of the US shipping charge. If you don't want to ship to other countries, don't lead us on, just say in your first post.

Sorry for the threadjack guys, I just feel a little hard done by.

Rob

 

[Arenared]

I can't believe you did that man - I posted first in this thread, and said I would buy one, and The only reason I delayed, was because you gave me a shipping estimate to the USA, instead of the UK like I asked for. Then when I pay, you instantly manage to refund my money and tell me "Sorry, I just got this payment along with another payment for the same item. The other buyer is in the US and thus costs significantly less to ship. Sorry! Ben" It may cost less to ship - that is why I paid you $13 extra on top of the US shipping charge. If you don't want to ship to other countries, don't lead us on, just say in your first post.

Sorry for the threadjack guys, I just feel a little hard done by.

Rob

Did the same to me.. (except i hadnt paid) on a different item not that long ago, suddenly Item sold, when clearly my response was instantaneuosly after his thread was posted. OH well live and learn..