I was wanting to add a 445nm laser to my collection and I saw on O-like.com they had some. I had previously bought my lasers from rayfoss, but they didn't have diodes or drivers. So I was wondering if I could solder this driver to this diode. Thanks!
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
$80 O-like 445nm 2W laser?
- Thread starter tthudium
- Start date
MessiTom
0
- Joined
- Jul 19, 2013
- Messages
- 207
- Points
- 0
Dont forget to buy a test load too. I think those components would work. You need a aixis module and heatsink etc etc you know rite?
wait for the vets to chime in
wait for the vets to chime in
bdgreenb
0
- Joined
- Jul 20, 2011
- Messages
- 723
- Points
- 28
You should get the diode/housing from dtr either on his site or ebay. Since moh and cajun(rip) are down, I would look in buy sell trade to see if someone else has a better suited driver that is most likely smaller
- Joined
- May 15, 2010
- Messages
- 1,307
- Points
- 48
DTR sells the drivers too, click on my orange sig for places to get parts.
The driver you linked to is quite big and would require the bigger hosts to fit it in
The driver you linked to is quite big and would require the bigger hosts to fit it in
- Joined
- Mar 30, 2012
- Messages
- 1,321
- Points
- 0
From sunday I will also have copper modules for $4 and on monday or tuesday I will have 501B heatsinks for $8 only !
Check my website here :
Sci-Fi-Lasers
:beer:
Check my website here :
Sci-Fi-Lasers
:beer:
