Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



501b/ Custom Sink and Knob NUMB 44 SOLD !!

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
6,004
Points
113
Hi,
Just had to do it, had a 44 diode for a while i set it to 2.8A /X Drive/G2 lens. Cut pocket with brass ring for contact board pressed in, with two solder tabs.ran this for 1min 30sec. just a little warm, very little. Cool small host with a lot of sinking.Takes 2-18350's
Here are some pics
Rich:) :sold::thanks:
 

Attachments

Last edited:



BobMc

Well-known member
Joined
Apr 23, 2016
Messages
3,824
Points
113
Re: 501b/ Custom Sink and Knob NUMB 44

Hi,
Just had to do it, had a 44 diode for a while i set it to 2.8A /X Drive/G2 lens. Cut pocket with brass ring for contact board pressed in, with two solder tabs.ran this for 1min 30sec. just a little warm, very little. Cool small host with a lot of sinking.Takes 2-18350's
Here are some pics
Rich:)
Nice build! Bet with that large heat sink that 044 will like its new home!
 
Last edited:
  • Like
Reactions: GSS

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
6,004
Points
113
Re: 501b/ Custom Sink and Knob NUMB 44

Hi BM,
Thanks it really doesn't get warm after 90 seconds, the sinks do there job well .I might pull the diode and driver and put it in a larger host and put it up for sale, undecided . i posted two other sale threads but the Mods didn't approve them since yesterday

Rich:)
 
Last edited:
  • Like
Reactions: GSS

Comander Shepard

New member
Joined
Mar 4, 2016
Messages
22
Points
0
Re: 501b/ Custom Sink and Knob NUMB 44

That is a nice build. How long does it take to cool down?
 

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
6,004
Points
113
Re: 501b/ Custom Sink and Knob NUMB 44

HI CS,
Not long at all because it doesn't get that warm to start with , and the mass os the sink is effective

rich:)
 




Top