Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



4W 465nm NUBM07 T6 Build (w/pics).

MurphyMurph

Member
Joined
Feb 3, 2020
Messages
49
Points
18
I thought I'd share my build pics of my 4W 465nm NUBM07 that I built sometime in 2017. Module was from DTR with an X/Drive preset to 3.5A. The build was from a T-6 flashlight and aluminum heatsink that I had turned and powder coated at work. The fab company I work for has a lathe but it is extremely difficult to get signed off to run it, otherwise I think I would have alot more builds by now ;). Below are some build pics and nightshots. Some of the images were taken alongside a 2W 445nm M140 (which I sold last year).

LPF1 20200223_194812 resized.jpg
LPF2 20200223_194519 resized.jpgLPF3 20200223_194456 resized.jpgLPF4 Drone 1 resized.jpg
Pic below was taken from drone perfectly timed as a mortar firework was going off.
LPF5 Drone 2 resized.jpgLPF6 resized.jpgLPF7 resized.jpgLPF8 19667623_10213450439440147_8543226294576525407_o_10213450439440147.jpgLPF9 resized.jpg
 



BowtieGuy

Well-known member
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,100
Points
113
Good job, really like your beam pics; thanks for sharing with us! (y)
 

GSS

Well-known member
Joined
Apr 28, 2015
Messages
5,073
Points
113
Wow those are some nice beam pics:)
So you did decan the NUMB07? It's such a pretty color..
Having to wait for the lathe and probably rush to finish is a bummer. Just for curiousity how much lathe time do they give you?
 

paul1598419

Well-known member
Joined
Sep 20, 2013
Messages
18,894
Points
113
Congratulations on your build, even if it was over two years ago. Thanks for sharing it here.
 

MurphyMurph

Member
Joined
Feb 3, 2020
Messages
49
Points
18
Wow those are some nice beam pics:)
So you did decan the NUMB07? It's such a pretty color..
Having to wait for the lathe and probably rush to finish is a bummer. Just for curiousity how much lathe time do they give you?
The diode was already decanned when I got it from dtr, not sure if he did it or got it that way? Unfortunately they don't give me any lathe time. The guy in charge of machining helped me make a couple heat sinks, and gave me a crash course on it, but I'm 'technically' still not signed off to run it.:confused:
 

GSS

Well-known member
Joined
Apr 28, 2015
Messages
5,073
Points
113
Yes probably Dtr de canned it since you ordered the lens..
In time you will learn;) and having access to that lathe will be fun:)
 
Last edited:

MurphyMurph

Member
Joined
Feb 3, 2020
Messages
49
Points
18
So I finally found the video that I put together of the drone footage from the 4th of July 2017. I hope you guys enjoy this perspective. The lasers in the video are 445nm M140 and this 465nm NUBM07E build. I "think" the lenses were G-2's, but I honestly can't remember for sure.
Full Disclaimer: This video was shot on a clear night, with good visibility. Everyone on the ground was constantly making sure that the sky was clear.

 




Top