3.3W+ Sinner's MagicStick MS-V5 - "Hyper-S" Copper Sink - 9mm Build 2.25A 2x18350

[sinner]

3.3W+ Sinner's MagicStick MS-V5 - "Hyper-S" Copper Sink - 9mm Build 2.25A 2x18350

3.3W+ Magic Stick MS-V5 2x18350 Custom 9mm Build
Hey Fellas :wave:

I made a new laser using 9mm 445nm diodes, This host is the new version of the sticks i will soon be releasing, Here are some images of the recently built 3.3W+ Laser.

Components Used:
- 9mm Nichia NDB7875 445nm Diode
- Modified 2.25A DX Buck driver
- AW 18350 Li-Mn (IMR)
- 24AWG Wiring
- Forward Clicky Switch
- 3-Element AR Coated Aixiz Glass Lens
- Ophir 20-C-A1-Y Sensor with LED Voltmeter Display
- Phone Camera :na:

Key Features:

- 24mm OD , Sleek and Stylish laser host for hyper handheld builds.
- Thinner than a C6 Host with extraordinary capabilities.
- Double sided 22mm OD Pill Design (Dual-Driver support).
- Holds Both Single 18650 as well as Double 18350/16340.
- ExtraOrdinary Stable Builds.
- No Set Screw (11.9mm) Pressfit*


Images follows!

Enjoy!

LPM Test: 3.3W Peak :drool:

​

 

[offroadfreak8582]

Re: MagicStick MS-V5 Host - "Hyper-S" (PICHEAVY)

Why do you keep taking my money every time? awesome man looks great!

Greetings,,

 

[Thejoker301]

Re: MagicStick MS-V5 Host - "Hyper-S" (PICHEAVY)

Wow sinner !

Very nice host :beer:

How is the duty cycle of this build ? ...

+1000 :gj:

 

[sinner]

Re: MagicStick MS-V5 Host - "Hyper-S" (PICHEAVY)

How is the duty cycle of this build ? ...

With an Overdriven 9mm 445nm Diode Setup like this, This host would run for 2min's before it gets more than warm, And that's when it has drop in power of just 150mW.. And absolute max. is yet to be determined :beer:

The whole body gets hot, amazingly and heat does feel being transported, The thing that impressed me the most is that there is a secondary dissipation AFTER you turn off your host at the completion of the duty cycle,

In Which the heat is carried away to the back (Aluminium) So it doesnt need to be finned, which actually saves a lot of copper to be wasted!!

The entire idea of this host was to design an intelligent host for people who would like solid and sleek at the same time..

 

[Thejoker301]

Re: MagicStick MS-V5 Host - "Hyper-S" (PICHEAVY)

With an Overdriven 9mm 445nm Diode Setup like this, This host would run for 2min's before it gets more than warm, And that's when it has drop in power of just 150mW.. And absolute max. is yet to be determined :beer:

The whole body gets hot, amazingly and heat does feel being transported, The thing that impressed me the most is that there is a secondary dissipation AFTER you turn off your host at the completion of the duty cycle,

In Which the heat is carried away to the back (Aluminium) So it doesnt need to be finned, which actually saves a lot of copper to be wasted!!

The entire idea of this host was to design an intelligent host for people who would like solid and sleek at the same time..

Sounds awesome !

Might buy one as well ... :beer:

 

[scumbagatheist]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

Man....I just payed for the MS-SSW, now you're doing this to me??

 

[Livinloud]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

How much would this host cost?

 

[DJNY]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

Man....I just payed for the MS-SSW, now you're doing this to me??

Wanna sell it to buy this one?

 

[scumbagatheist]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

Sell it? Hell, it hasn't even shipped yet!

 

[sinner]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

Man....I just payed for the MS-SSW, now you're doing this to me??

Sell it? Hell, it hasn't even shipped yet!

Haha, Brian just paid me for a MS-SSW JAD (2.2A Driver Installed with wires popping out screaming for a 9mm :na that i originally planned for this diode..
Co-incidently his PM was about the very host i had left and i traded it for the love he had for it and some money offcourse !!

@DJNY: PM replied sir!

 

[Blord]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

That is a nice piece of copper head. That should cool the diode much better than aluminum.

 

[scumbagatheist]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

Sinner, love is just the word I have for your host. You do great work, and I'm honored that you would let go of it for me.

Seeing as I am so antsy, any idea when this thing is going to get in the post?

 

[sinner]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

Sinner, love is just the word I have for your host. You do great work, and I'm honored that you would let go of it for me.

Seeing as I am so antsy, any idea when this thing is going to get in the post?

I appreciate it man :beer: in about 3-5 days!!

That is a nice piece of copper head. That should cool the diode much better than aluminum.

You're right, Isn't it.. I also heard somewhere about "Once you go copper , You can never come back" Which actually is true, Even a 3X Bigger Aluminium heatsink wouldnt perform just as good!
P.S: How'd you like the names on this :na:

 

[IsaacT]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

Hey Sinner I think he meant the MSSSW he purchased from you rather than the host this thread is about. I think if he reads 3-5 weeks on the MSSSW he might pass out from anxiety. I know I would

-Isaac

 

[sinner]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

Hey Sinner I think he meant the MSSSW he purchased from you rather than the host this thread is about. I think if he reads 3-5 weeks on the MSSSW he might pass out from anxiety. I know I would

-Isaac

Corrected, He wont have a clue !

WBS: :thanks: +1 errr , when it let me!

 

[scumbagatheist]

Re: MagicStick MS-V5 Host - "Hyper-S" Copper Sink

I got it, gentlemen. Thanks. I need to get this SAiK LPM'd so that I can sell it and buy a diode for my new monster. I may just go green...