2x KRYTON GROOVE 445's

[jnrpop]

Two Kryton groove fade's for sale below

1# FS: Kryton Groove fade "Gun metal grey to black" using the XJ130 445nm diode. Uses a Drlava Boostdrive set at 800ma, and a 405/445nm coated lens, dot is very clean, no splatter. The grooves can use the 18650 batts or to cr123's. The voltage supplied will have to be lowered if using the two cr123's, but the 18650's are the way to go! The Grooves use a press fit design meaning diode is pressed straight into the laser head for optimal heatsinking, but most would no this


2# FS: Kryton Groove fade "Gun metal grey to black" using the XJ130 445nm diode. Uses a FlexdriveV5 set at 650ma and a 405/445nm coated lens, dot is very clean, no splatter. Basically the same as above but uses the flexdrive V5 and is set lower.

Both lasers run very well, dont seem to get hot and the the beam quality is quite good, no splatter. They both come with coloured plastic caps, rubbers for the grooves etc. Hosts are perfect, no scratches or dents. Shipping will be 20 USD, insurance optional at 5.00 USD but never had any problems so far.
For sale at 230 USD each

Thanks

 

[jnrpop]

Forgot to add, also have a 12x laser that needs a new driver, PM me, thanks

 

[Pontiacg5]

You have the lenses in backwards!

 

[daguin]

You have the lenses in backwards!

No he doesn't. Those are the older style 1/2 threaded lenses

Peace,
dave

 

[jnrpop]

Yep their in the correct way, focused to infinity. Thanks dave.

 

[tripyamine]

Pmed for item #1