Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

~17W, 15W and 12W blue laser handle with orange body!

Joined
Oct 18, 2014
Messages
546
Points
63
this is new my version i was built for a my customer!
i use 3 x NUBM 44 but i set current 3.5A each, because it very hot
- SKdriver x 3, G2 lens x 3, 6 x 18650
pls see video and some pics, and send to me a message for order similar one
thanks!


and here is blue 15W :

48762088876_bc7b714bc5_z.jpg


and 17W Blue laser:



17w Blue laser handle burning stone :


48809709768_8a825c1d57_z.jpg
48810206757_c3fe54ae81_z.jpg

49181396117_23218bb09f_z.jpg

49181184791_bfbb612593_z.jpg

49181184511_7ab405e427_z.jpg
 
Last edited:





Joined
Jan 29, 2014
Messages
12,031
Points
113
Nice, the beam has the appearance of a knife edge, but with three diodes, and three lenses, does that mean you have three diode and collimation assemblies in parallel on the output? Can you post a photo of the output end of the host?
 
Joined
Oct 18, 2014
Messages
546
Points
63
Nice, the beam has the appearance of a knife edge, but with three diodes, and three lenses, does that mean you have three diode and collimation assemblies in parallel on the output? Can you post a photo of the output end of the host?
i have fix it, can not open it to take a pic! except open to develop it to version higher!
 
Joined
Sep 20, 2013
Messages
17,252
Points
113
That has got to have a short duty cycle. How long before the outside gets too hot to touch?
 
Joined
Oct 6, 2015
Messages
1,355
Points
113
Imagine if someone was sitting next to the window and a huge laser beam shinned in 👽
If you use 3X Nubm44 shod you get like 15W> at 3.5A i wonder if the heat causes the diodes to lose power what heatsink do you use its a very nice build! can you take a picture from the front of the laser if possible !!
 




Top