Yes, thanks so much. Will put to through its paces. esp creating my own .ild files - which I have not done before. Any ideas with the best software to use?.
Again, thx a lot.
I do not believe this :(. <LASER IS WORKING> When I plugged everything in for the test, I thought maybe the Key interlock switch operates back the front. What I had been doing is switching the key 'On' - then switching the rocker mains switch on after that. Turns out the key switch was already...
Gee David, thank you so much. You have been very helpful and detailed.
The thing that raised concern with me was at power up I expected some activity from the lasers at output, even to switch on to go to standby - but I might have that wrong?. Makes sense that the lasers don't work until being...
Hello everyone, and thanks for the help thus far. Please find enclosed photos of the unit - and a link to a video of me testing it out. These were also sent to the seller for analysis. Thx!.
The images are of the unit opened up, as per the sellers request.
Sorry will upload photos of the unit asap.
Yep. have been in contact with him, and for the start we started with a hiss and a rage - but further into the problem, he stopped making contact. So thought I would see what was out there for a fix. Will try and make contact still.....
Yes, a thought I initially had. But the safety interlock should 'lock' off all operation of the lasers - including after the unit is powered off. So thought maybe not?. Its a direction worth looking at. Cheers
Hi, and thanks for the reply. That is a good point. I had turned the safety lock on (Key switch) - but it may not be wired up inside. Will check that!. Thx
Hi guys - just wondered if any body has encountered my problem..... Just recently I purchased an RGB Laser projector from the U.S. (2W). Upon arriving, I powered the unit up, but seems to have a slight problem - requiring service. The unit switches on okay, I have mains indicator light on, Menu...