As some of you might have noticed I've been away for a while. We just moved house again and had a baby girl all at the same time...Things were a little hectic to say the least.;)
Anyway I was just looking at my signature and my old FS thread for my Sinner builds has disappeared? This is...
Ive been meaning to post this for a while now. Just thought some of you might appreciate the sparks and laser beams! ;)
The tesla was a kit off ebay and the fist laser my Sinner Cypreus IIIB 465 with 10x beam expander. The other colours are from my RGB PTEG 3D printed laser.:beer:
Well Ive been meaning to post this for a while now...well actually nearly 2 years! I just never got around to posting.:whistle:
I have actually made 5 of these in the meantime and this time I decided to take some pics, so that Id have something to post!
Ok so the host I used in the latest...
Haven't seen a thread yet, so just a quick one to wish you all a happy Easter! Enjoy the time with your families and don't eat too much chocolate! ;) :beer:
On offer are one mirror polished Phobos and one mirror polished MS V1, both built with NUBM44 diodes! :)
For those who might be interested in how these lasers are built, I have written a tutorial thread here.;)
Here is an example of the mirror polishing! :)
Specs Phobos - 7 W 450 M44...
On offer are two mirror polished Envy builds with NUBM44 diodes! :)
For those who might be interested in how these lasers are built, I have written a tutorial thread here.;)
Here is an example of the mirror polishing - finished and whilst building respectively! :)
Specs Envy 1 - 7 W 450...
Well I was going to do this as a FS thread with a small tutorial on how to build a laser, as I havent done any with these hosts, but it got a bit longer than I planned. So Ill just link the FS threads to this one. :D
Ok these are the diodes I extracted from an X..J..V..1 projector. They are...
Hi guys just a quick one.
I would not recommend using a 3 element with a NUBM07E diode, or any other high power diode for that matter. I just finished a custom build in a Sinner Phobos and the diode was set a exactly 4 A with an SXD. I have never used a 3 element with these diodes, but thats...
Hi Guys I thought Id just post a few pics of a new build, I just completed for a member here. It might give some of you an idea of how I make my pen builds and help those of you who may have a pen host from sinner lying around. :D
The host is made of pure copper and the 12 mm hole is actually a...
Just opening a new thread for my completed lasers!
Below is my latest build :) I plan to add more as they are built, but I must find some drivers first...;)
The laser FS is on the right and the 465 on the left has already been sold!
Specs 7 W 450 M44
Sinner MS V1 host (new design) with...
I was just going to update my previous thread on the Fasttech 589 LED, but then more and more pics came as I built and so I decided to just start a new thread. ;)
So I finally got round to reflowing the emitter on a star and finishing up my mini 589 build.
Although Fasttech states 1 A max...
Hi guys this is my new FS thread for Sinner custom built lasers.:wave:
These are the hosts I have available.
Here you can see the copper pressed heat sinks used in these hosts :)
As I did previously with the grooves I will offer mirror polishing and GITD as options:
GITD* (Green...
Hi Guys
Just a heads up that I managed to get the last of Sinner's stock of hosts. Ill be opening a FS thread over the next week, or so. As he only had a total of 17 hosts left and 3 beam expander adapters, I'll probably be offering them as custom builds.
In total there are:
3 x 26650...
Ive just ordered this, as the wavelength looks rather interesting! Might be a cheaper alternative for those wanting a multimode yellow! lol ;)
https://www.fasttech.com/products/0/10010780/3740401-cree-xp-e-a3-n3-62lm-595nm-amber-light-led-emitter
Will update once it arrives with some pics.:beer:
Hi guys, as many of you will know I have run out of Kryton groove hosts and as such these will be my final offerings of Kryton Grooves. :(
To commemorate this last sale however, I have decided to make a special limited edition polished batch!:D
Here are some pics of the lasers in action. They...
Recently it has come to our attention that quite a few SciFi customers have had issues with their lasers. As SciFi seems to have ceased business, it is not recommended to return items to them for repair. Pman and I have therefore decided to offer help to those of you who have bought a laser from...
All sold, thanks for looking! 2 x PHR 803T Kryton Grooves!
I thought Id offer a couple of much cheaper builds for those of you who might want a lower power starter laser. Please note, however 80 - 100 mW is still dangerous!
The two 405's on offer here have an unlimited duty cycle and have been...
Hi Guys
This topic has cropped up a few times recently, so I thought Id just post a reference thread for the construction of a 3 element lens. The idea is simply to let people know how to re-build a 3 element lens, should they have forgotten which order and orientation the lenses fit into the...
Hi Guys
I would just like to say that Im more than a little disappointed with this kid.
I have approximately 30 PMs where he asked questions about building a laser and I patiently helped him over 2 weeks with advice. He repeated the same questions, and ones I had already answered, over and...
---SYMA X5C---
Well something new for you guys today. After seeing a few of Thing's multirotor threads and getting an offer to review any item from Tinydeal.com, I decided to have a shot at testing a Syma X5C-1. :)
Specifications
Brand: SYMA
Material: Plastic + Alloy
Channel: 4...