Search results

I'm selling my laser goggles from OEM Laser Systems, they are ML7, style 34, high-tech wrap around. Bought about 3 years ago, still in perfect condition, have spent most of their life unused in a box, they are very dark, not light blue like it shows on their site. Specs for goggles are: OD 5+...

It's been a while since I've been on here, I'm doing different things now and thought it's time to sell all this stuff I haven't used in a while. Some stuff is sold, read the listing below to see what is still available. In the first picture; 2x5mW bluray lasers in boxes, 10mW green pen, 30mW...

I've designed this test load in a project box to do away with all the fuss that I'd normally find using a test load and make things easier. I've put this test load on a breadboard with 6 IN4004 diodes and a 1ohm resistor and connected everything up to banana sockets with extra sockets so I can...

I'm looking to buy some front surface mirrors, I can't find anything on ebay that's right. The mirrors I'm looking for should be between 10mm and 25mm and preferably round, but square will also do. And I'm looking for dichro parts, 25mm 3-axis mounts, and 25mm pass green/reflect violet and pass...

I've always wondered how they made these, the other day I thought it would have something to do with lasers, I just found this video http://www.livevideo.com/video/7AC708782C5949008A44264D5FE5E3E1/3d-laser-engraving.aspx Wonder how strong the green is to do that :D

I am rather bored over the holidays atm, so have decided to start sacrificing some of my PHR diodes to testing. The build I am using is the 3xAAA MXDL with a jayrob heatsink and a flexidrive set to 185ma for the PHR-803T diode. It is measuring 134mW on startup. It is using an Aixiz acrylic lens...

My leatherman pliers and even my cheap needle nose pliers that I like using for squishing diodes into modules and extracting diodes from heatsinks have both recently turned magnetic, could this damage diodes if I still use them? The tip of my pliers are strong enough to hold onto paperclips :-/...

A mate of mine is getting a small amount of liquid nitrogen, about 1 litre or less. What are some fun and interesting things to do with it, other than making ice cream?

I'm selling a few BluRay lasers for some holiday funding, they are all using PHR-803T diodes. From left to right; 65mW box @ 125ma using a 9v battery. USD$33 Sold 130mW MXDL using 175ma flexidrive and 3 standard AAA's. USD$95 Awaiting payment 110mW MXDL using 150ma rkcstr drive and 3x10440's...

Going through photos I've taken for some reason or another, I decided to put some up on here for people to see :) First up is 2 BR's @ 60mW and 110mW with 2 red's @ 130mW and 210mW and 2 greens @ 100mW and 40mW 8-)

Looking on ebay just saw this http://cgi.ebay.com.au/9-LED-Police-Torch-Flashlight-Light-Lamp-Holster-RED_W0QQitemZ110302733019QQcmdZViewItem?hash=item110302733019&_trkparms=39%3A1%7C66%3A2%7C65%3A1%7C240%3A1318&_trksid=p3911.c0.m14 Looks just like jayrob's pocket pal laser host just a bit more...

I have for sale these 3 lasers. The first is an 803T powered by a flexidrive @ 108ma for 80mW. It is in a leadlight case and runs off 2xaaa primaries. I'm asking $140 shipped. The second is a Sony 20x open can diode powered by a rckstr drive @ 400ma for 210mW. It has a triple element AR glass...

Hi, I am looking to buy an ebay laser host preferably like this one http://www.laserpointerforums.com/forumdata/yabbfiles/Attachments/50mw_001.jpg I think the DX one's are the same too? I'm just looking for the empty host, hopefully still with a button piece. So does anyone have any of these...

I'm doing a little write up on the modules posted here, for anyone who has been interested in getting them. I won't post pictures cos the modules look the same in the picture and everyone knows what a greeen laser looks like. http://www.laserpointerforums.com/forums/YaBB.pl?num=1219896800 After...

I'm selling this Blu Ray in a box. It's an 803T Diode running from a DDL circuit fixed at 125ma and powered by a 9V battery. It's only putting out 65mW for some reason. It still burns things, makes a nice beam and flouresces plenty. Maybe someone would like to buy this and attempt to fix it, or...

I've finally completed my first Blu Ray MXDL host. I've used a fixed rckstr drive @ 150ma, and an 803T diode from AMK's 3rd GB. (I've had alot of luck extracting these diodes, I killed the last 3 I had from another GB very quickly but that's another story). It's host is the 5W MXDL that uses...

I'm hoping someone can help. I've got a bunch of these hosts http://www.dealextreme.com/details.dx/sku.2110 and red LD's laying around so wanna start on a project tomorrow. I think I only need to add a capacitor and resistor to the circuit but I'm not sure where/how to connect them or what one's...

I finally got my first 803 working, and I love it. It's the diode I was trying to put into an mxdl, I gave that up and have put it in a box where it works fine. 60mW @ 125ma... It lights matches, burns things, skin included. I've only played with PS3 diodes before. This laser is so much more...

I'm trying to make my first 803 in a MXDL 5W host, the one with jayrob's heatsink. I'm using rckstrs drive at 150ma and 3 Ultrafire 10440. So far I'm on my 2nd diode and can't understand what's happening. I'm hoping someone can shed some light on this. The first one I had in worked strong for...

I got bored last night and since I now have some tiny mirrors from andy_con, I decided to put them to some fun use. I've read many times how to make spirographs with fans, I have lots of fans on my computer and a fan controller, so I opened it up and made a quick spirograph hanging outa my...