Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Search results

  1. scumbagatheist

    Want to upgrade my 3W laser

    About 5 years ago, my daughter and I built a custom 3W 405nm DTR diode laser. It's a simple setup, with a copper heatsink/diode holder of around 100 grams. It's a simple 18650 flashlight conversion. I'm using it at work, and frankly, with the new diodes out, and me being so busy, I'd really...
  2. scumbagatheist

    FS: La Spada Verdi, My Prize and Joy

    I'm also willing to put up 675mW 405nm Kryton Groove as well! Make me an offer.
  3. scumbagatheist

    FS: Ophir 20C Sensor w Power Supply and Heatsinking

    Humphy, there's your answer. No, it's not been calibrated since I bought it. But, it's only a little over a year since I've owned it, with virtually no use.
  4. scumbagatheist

    FS: La Spada Verdi, My Prize and Joy

    Bump! Daddy needs a new PC!
  5. scumbagatheist

    FS: Ophir 20C Sensor w Power Supply and Heatsinking

    Thanks, guys! It's been a warm reception back. I do hope somebody decides they have to have this sensor. Daddy needs a new video editing PC.
  6. scumbagatheist

    FS: Ophir 20C Sensor w Power Supply and Heatsinking

    Good to see you Alan. What kind of laser are you looking for? I'm putting up several of mine for sale.
  7. scumbagatheist

    Hi, Dave. I know it's been a while. But, can I get my B/S/T post approved?

    Hi, Dave. I know it's been a while. But, can I get my B/S/T post approved?
  8. scumbagatheist

    FS: La Spada Verdi, My Prize and Joy

    Hi, all. I'm finally back, and I'm unloading my toys. Up for sale, today, is the world's first 520nm diode in Sinner's MS-SSW. This little beauty generates just over 100mW, runs on 2 X 26650 batteries with a total capacity of 8000mWh. You could literally run this lasers for 27 hours before the...
  9. scumbagatheist

    FS: Ophir 20C Sensor w Power Supply and Heatsinking

    Hi, all! I know it's been a very long time since I've been around the forums. I went through some difficulties, challenges, and a change in jobs. I'm offering up for sale my Ophir 20C, along with the custom heatsinking I built for it, and the power supply, as well as the PS and DMM interface...
  10. scumbagatheist

    NEW STOCK: The MS-Envy - 18650 Custom Laser Host

    Re: All Gone: The MS-Envy - 18650 Custom Host (Restocking) Hi all. I should have ALL of the JAD kits shipped out by the end of the weekend. Again, my apologies. I'm doing everything I can to get them to you and have them be perfect. I'll PM the members as they go out.
  11. scumbagatheist

    NEW STOCK: The MS-Envy - 18650 Custom Laser Host

    Re: All Gone: The MS-Envy - 18650 Custom Host (Restocking) Thanks guys. Yes, I am buying new drivers for the JAD kits. As soon as they're in my hands, I will ship out the hosts.
  12. scumbagatheist

    NEW STOCK: The MS-Envy - 18650 Custom Laser Host

    Re: All Gone: The MS-Envy - 18650 Custom Host (Restocking) Hi, guys. I have an update for you. All of the MS-Envy and V4 orders, save the JAD kits, HAVE shipped. They are on their ways to you now. There were some issues with the drivers for the JAD kits, so I am going to pay the extra out of my...
  13. scumbagatheist

    SBA Lasers Updated Sales Thread *REDUCED*

    :bumpit: Bump! I've reduced prices on my existing lasers! I'm also proud to announce that Sinner's MS Envy has arrived! I am offering custom builds with this new host! Look for a build thread coming up, showing it off with a 9mm 445nm diode. :drool:
  14. scumbagatheist

    NEW STOCK: The MS-Envy - 18650 Custom Laser Host

    Re: SALE:The MS-Envy - 18650 Custom Host Good news, everyone! The Envies are here! I've received the hosts from Customs, and it seems they survived pretty well. Shipment will be taking place as soon as possible. Be patient, boys and girls...they're almost in your little hands.
  15. scumbagatheist

    Gattling Host Concept

    Mike, you never fail to amaze! Good luck with this beast! Well done, sir.
  16. scumbagatheist

    SBA Lasers PL 520 Build / Sinner MS-SSW Host "Malice"

    Re: SBA Lasers PL 20 Build / Sinner MS-SSW Host "Malice" According to my calculations, the charge runtime is approximately 27 hours between charges. Now, combine that with an unlimited duty cycle, and you have one hellauva handheld!
  17. scumbagatheist

    SBA Lasers PL 520 Build / Sinner MS-SSW Host "Malice"

    Re: SBA Lasers PL 20 Build / Sinner MS-SSW Host "Malice" Wow! LB, you do some terrific reviews! I'm glad I could be a part of it, and I will always be happy to work with you. I'm so glad you're enjoying the lasers I've built for you! I'll rep you when I can. For anyone reading this who has to...
  18. scumbagatheist

    NEW STOCK: The MS-Envy - 18650 Custom Laser Host

    Re: Pre-Sale: The MS-Envy - 18650 Custom Host Yeah...I have a car running on a spun bearing insert. I'm in no position to buy a 488nm diode..
  19. scumbagatheist

    NEW STOCK: The MS-Envy - 18650 Custom Laser Host

    Re: Pre-Sale: The MS-Envy - 18650 Custom Host I'm thinking of making my Envy a 1W 638nm. Nobody's been playing with those lately, and I am less than excited by the 445s these days. I sooooo need a 488nm diode....
  20. scumbagatheist

    SBA Lasers Updated Sales Thread *REDUCED*

    Re: SBA Lasers Updated Sales Thread Thanks, Sinner! I still want that 520nm Kryton! But, I need to buy a new car...so, everybody, buy now! Then I can start blowing money on my toys! If somebody wanted to whole collection, with a 520nm in there too, I still have a couple of Krytons, ready to...




Top