Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Search results

  1. RyanElectro

    External Lens Springs | SMOOTH focusing | WORKS with G Lenses!

    Hey LPF, I've seen our need for external lens springs, especially ones that work with G-lenses. Current external lens springs only work with the Aixiz glass lenses because they hit solid height before a G lens can get close enough to the diode to achieve a parallel beam (aka infinity focus)...
  2. RyanElectro

    Why do chicks scream so much?

    Ok.. I'm sure many of you have encountered times when something shocking happens, girls in the general vicinity would scream, and scream like crazy. It seems it doesn't even take much to trigger this reaction, simply talking about an exciting event, girls can go wild screaming over it. The...
  3. RyanElectro

    WTB: Pills + Brass rings + Clickies

    Hey guys, I'm looking for some spare pills and brass rings, as well as some clickies. Let me know if any of you have any of these, I'll buy them of ya, as many as you have. Let me know and thanks! Ryan
  4. RyanElectro

    SOLD: "Ace V2" @ 2300mW+ | Long Runtime 18650 Setup | FREE Shipping to CAN&US

    SOLD: "Ace V2" @ 2300mW+ | Long Runtime 18650 Setup | FREE Shipping to CAN&US Hello fellow hobbyists, Just finished some of my Ace builds, and I'm selling my most powerful one here on LPF. This is the "Ace V2", which differentiates itself from previous Ace builds with the help of a...
  5. RyanElectro

    The JAD V2 Kit Showcase - 1x18650 Heavy-Duty C6

    Good day ladies and gentlemen, brothers and sisters, comrades, friends... I was thinking the other day, that someone needs to fill in the vacuum of Moh's departure. So I thought of a JAD kit idea, with a little twist ;) I just finished the build I came up with and am actually excited to show...
  6. RyanElectro

    Pesky BenBoost Drivers

    Hey guys, I've been building a couple of 12x S06J builds and realized that already 2 diodes died on me when set only at 480mA (measured with a testload on 5 diodes, though the Ben boost is supposedly set at 498mA). They didn't die immediately. They worked great for the first 5 minutes of total...
  7. RyanElectro

    Sold: 445nm @ 2500mW+ "Ace of Steel" MONSTER EDITION

    Up for sale is a Monster Edition Ace of Steel build @ 2500mW+ Description: Equipped with an ultra-rare, ultra-efficient 445nm diode & a high-powered burning lens, the Monster roars at over 2500mW on my LaserBee. It may very well reach into the 2600s as it hits my LPM's max of 2500mW at 22s...
  8. RyanElectro

    A Peek into Ryan's Builds: Heatsinking a Hot Linear Driver

    Hey guys, We all know how hot linear drivers can get sometimes, especially when ran at such a high current as 1.8A. Today I'll be showing you how I heatsink these hot linears :eg: So let's cut to the chase. Here is a customer's build I finished yesterday: Walk with me as I prep the...
  9. RyanElectro

    Please Delete

    Delete me.
  10. RyanElectro

    Ryan's Build Shop BETA [Closed] [A new store will re-open soon!]

    Ryan's Build Shop has now closed. I will re-open a new store with new stuff, when I have gained more rep from the community with open display of my builds. Everyone who has purchased, your builds will still be completed and shipped, as promised. Thanks everyone...
  11. RyanElectro

    A Look at Ryan's First Build - 1.8W 445nm C6

    Alright guys, so I've finally completed my 1.8W 445nm C6! Technically, it's my 3rd try, since the first two failed :P My Thoughts It was a long road, but a very insightful one it was. Went through over 5 hours of work trying to figure everything out for the first time, ran into a couple of...
  12. RyanElectro

    G-2 Lens Focus changing?

    Hey guys, I just built my first C6 and its hitting 1.8W with a 3-element and 2.1W with the G-2. And I'm freaking amazed by the laser and its power :drool: One thing though: why does the G-2 lens change focus depending on how I hold the laser. It doesn't happen with the 3-element. It seems it...
  13. RyanElectro

    12X S06J Blu-ray Heat

    Hey guys, I was wondering with the 12X S06J Blu-ray diodes, do they heat up as much as an A/M140 at the same current? ie. Driver @ 500mA w/ M140 give off same heat as? Driver @ 500mA w/ S06J Or, does the S06J give off much more heat at 500mA because it's max current is only around 500mA...
  14. RyanElectro

    Several n00b Questions

    Hey Guys, I need some help with couple of things: Can this diode press be used to take OUT a diode from a module? It's from Cajunlasers Can the 12X S06J Blu-ray diodes be set up the same way as a 445nm A/M140? (both can be set up linear/buck w/ 2 li ions OR boost with 1 li ion?) Any special...
  15. RyanElectro

    Buying C6 Brass retainer ring!

    Ruined my brass ring :( I need a replacement. Does anyone want to sell a C6 brass retainer ring! Ryan
  16. RyanElectro

    Where's the "battery intake" on the C6?

    Hey guys, Now that all my parts are here, I've gone ahead to build my first laser with a C6 host. I have everything set up (I think) but my laser's not lasing. I went ahead to recharge my batteries which are brand new and am waiting for a full charge atm. For now, I want to make sure, is...
  17. RyanElectro

    How to test diodes

    Hey LPF community, Was looking into how one can test a range of diodes in a simple manner. So say, we have 20 diodes and would like to test them in a quick and simple way at a set current, what's the best way to do so? Here's what I've been thinking:: Press diode into aixiz module with lens...
  18. RyanElectro

    How to test diodes (DUPLICATE, DELETE)

    ***DUPLICATE THREAD. DELETE.*** Hey LPF community, Was looking into how one can test a range of diodes in a simple manner. So say, we have 20 diodes and would like to test them in a quick and simple way at a set current, what's the best way to do so? Here's what I've been thinking:: Press...
  19. RyanElectro

    FS: 1W+ 445nm diode

    1st diode SOLD Selling 2nd 445nm A-140 diode for $39 They are A140s that daguin sold to me about 2 weeks ago. Brand new UNUSED. Shipping to Canada $1, to US $2, International $5.
  20. RyanElectro

    Review: Lazerer TINY 150mW 532nm Pen

    Hey guys, This will be my review of the Lazerer TINY 150mW green pen laser. Product Picture: Power Certificate: Metered Output (from a LaserBee USB): 1st: 2nd: 3rd: 4th: *Each done after a full charge So, I'm metering a stable max of 122mW, and my powercert says 143mW. Hmm, that's...




Top