Yea, I really tried soldering the brass ring to the board but no matter what I tried I even tried using solder flux which helps solder stick, the bridge connection, just won't hold, got so frustrated honestly. Hopefully, this gets fixed, the batteries are also making contact because when I try...
No, the driver side is working fine since my batteries are the flat top I made a bump with solder to make sure it contact if you put the batteries in 2x16850 and you bridge the end to the host with a piece of metal it turns on and focuses, the switch also works when you take it out of the...
I solder the edge of the board and nothing happened while I was trying to solder the ring to the board will it just won't connect to each other, so if it's loose it won't work, it has to be solder to the board?
Tell me if I'm getting this right so solder a small piece on the outer edge of the tailcap board, like the chip and it should contact the outer walls which will make it turn off and on? or do I solder something to the outer board?
I'm looking and see only 2 wired of metal on the edge of the board and solder to board to the clicker, where do I put older on, then do I just close it, and it fits or what, sorry if I'm not understanding, my first build!
alright thanks, I'm almost home gonna go and try that and see if it works, so solder the copper of the board on the edges to the ring got it, I tried do it on top of the ring to center of board didn't wanna hold even with flux lol, hopefully this works
Hello, I was building the laser and everything put together but the laser won't turn on when I took apart the tail cap and the ring and button, the s4x host, took out the tailcap board and copper ring and tried it like that and it worked, for some reason the ring isint making contact with the...
Wow that information was, just insane thanks Jordan for the explanation, really helped, also thanks for responding
Also, forget the custom order again Jordan, and the email, just gonna do 1.8a to be safe, thanks again, Artsem
Yea not gonna lie, was really hyped for this building it on Thursday cause my friend will show some things, first, actual build, owned a few lasers, but really excited, also have a buddy with CNC machine gonna cut some grooves for 2 green tritium vitals gonna look dope
So I bought this diode from dtr and was wondering if there are any drawbacks like is there anything I should know before building the laser together or if the g8 lens is a bad choice, is there gonna be a box with g8 lens or no?
Thanks, everyone, Artem
Edit: DTR wrote about this diode and...
Yea I knew there is a couple I was just wondering what host options do i have because the survival lasers host isn't my favorite so i guess I can pm lifetime or someone else, because all I wanted to see were some estimates and if I do like them to buy