Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Search results

  1. AUS

    Laws in Australia

    OK, here, it depends on what state you are in. In NSW and VIC you can have up to 5mW. Anything over that which is HAND HELD and BATTERY OPERATED over 5mW is a prohibited weapon. In NSW you are allowed to posses one if you are a member of an astronomy club. Shooters licenses have nothing to do...
  2. AUS

    Foam tube cutter

    If you make a line instead of a dot, the power will have to be a LOT greater, probably not enough to cut very quickly if at all. You would be better moving the laser in a jig to cut it. The other problem will be that the focus length will change from one side of the tube to the other, but at...
  3. AUS

    Driving a 500W LED Panel - High voltage, constant current, buck, capable of 7A?

    It should be possible to use a linear regulator to drive a bunch of pass transistors (2N3055's or something) like we did in the old days with large power supplies. This is the basic principle .
  4. AUS

    Remember to exercise those argons!

    I gave mine a run yesterday... Poor thing, I left it for almost 2 months at one stage. Now I just need a multi-line one and maybe a krypton!
  5. AUS

    FEELER: Plasma Speaker Kits

    Very cool! OK I'm in. I'm impressed you had the Stig test it too! :D
  6. AUS

    Red diode from DVD writer.

    Yes make sure it's in a decent heat sink. I normally start around 100mA which is pretty safe for modern DVD burner diodes and work up from there. Keep watching the heat and how much current its drawing. When you say one is half-round, is it a plastic or "flat" diode?
  7. AUS

    14x Blu-Ray Burners

    @ lazeerer I still have some money with you for the 2x 638nm group buys. Would that come close to buying me something in the SO6J performance range? Any other interesting diodes on the horizon?
  8. AUS

    Anyone else here into CB Radios?

    Note frequencies / bands / legislation veries from country to country... I started in 27MHz in the 1980's then UHF CB then amateur radio in the early 90's. haven't played with them since. i didnt renew my license when i moved to NSW but I still have Mobile / handheld 6m / 2m /70cm as well as...
  9. AUS

    MAGIC and IRON4D by rhd - Info and Guide

    I like the concept of the IRON4D. Is the heatsinking adequate for a reasonable duty cycle?
  10. AUS

    "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (REFUNDING.!!!!!!)

    Yes 780nm at arounf 150-200mW are used in CD burners, 650nm are used in CD readers. They're usually both single mode and its not unusual to find them both in one package.
  11. AUS

    New Ausssiieee

    Basements are fairly rare here. Judging by American movies every house there seems to have one! Most aussie guys have a "shed" to play in. My grandparents built a house with a wine cellar when I was a kid, it was the best thing ever at the time!
  12. AUS

    New Ausssiieee

    You would be paranoid too if everything you hold dear and holy was illegal :P
  13. AUS

    Member Map

    There are others in Melbourne I have visited and bought stuff off who aren't even on the map ;)
  14. AUS

    CLOSED - Secret Santa 2012!

    Re: Signup - Secret Santa 2012! I'm still trying to find out if i can send a kangaroo or emu through the mail....
  15. AUS

    FS/FT Large Vacuum Tube

    Re: Selling some stuff Wait did someone say Bacon??? :drool: Throw in maple syrup and I'll consider it!
  16. AUS

    "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (REFUNDING.!!!!!!)

    I've seen these diodes in laptop DVD burners they look the same and are as he describes. Fiiddy, they are common case / cathode?
  17. AUS

    New Ausssiieee

    Yes I got a PM from him. Haven't been on for a few days and missed all this. What did he do? (Other than being an idiot)? i always worry about people in NSW PM'ing me wanting to buy lasers, I figure if they're another state they're less likely to be an undercover cop.
  18. AUS

    Mitsubishi ML520G71 638nm 500mW Titanium Ice build

    Depends on the size of the driver and the pill. I prefer round drivers because they fit in the pill, or micro size square ones that fit in the pill.
  19. AUS

    what is the ray out

    Well Said!
  20. AUS

    what is the ray out

    Nope, no way, it's just filtered flash lamp light. Although, Of interest you CAN make a KTP crystal lase with a flash lamp according to Sam's site! They did it by exciting a green laser pointer using a cheap camera flash. Unfortunately the crystal can shatter if you put too much power in it though.


Back
Top