On a recent thread, the UVLED365 was mentioned.
It is a .4 mW 365 nM LED offered by Qphotonics.
I went to the site and ordered one with an invoice of
$39.00 and no shipping.
Today, I see that they took me for $56.00 and a call
to them reveled that they added $17 shipping not shown
Has anyone ever tried building a laser into a Klingon disrupter toy housing?
It seemed like a neat brother to a Star Trek phaser.
An SSY-1 NdYag module seems to fit like a glove in this "toy" The opening under the module fits a basic Axis module and the trigger is two stage for target and...
This is my last try ------
I'm getting older and don't need this meter. It is a Scientech 374 (37-4002)
with 360203 head. Battery powered for remote use.
It is rated for 100 Watts! $600 plus shipping in the USA.
This has been a mess trying to list --- Lets just try a Scientech 365 or a...
I'm playing with my "tiny" etcher which I got from ebay a couple
years ago. I removed the low power 445 laser and replaced it with
a bigger blue. As normal, it doesn't focus to a point.
I want to put in a 405 (about .7 watt) but I need a driver which
puts out 6-7 volts AND has a TTL or...
I'm getting started here on a new project. I hope to make this portable (handheld) !!!
A big thanks to Chris from way north for his help.
These are the main components. The FAP RED module, a SUPER buck driver from TI and a
battery pack to kick ass.... The Pot is for power control and the PB...
Who polishes and recoats NdYag rods? I have one which
needs a job on one end. It got a little crap burned onto it.
As I recall, it has ~ 2 Deg angle on it. Try to keep it low $.
The big rod is ~ 6" x 3/16" -- I have another 5 mm x 90 mm
with a small pit at one end but at the very edge.
I just got my 520 module from DTR. Great member....
I built it into a simple housing but had to do machining
to make it look like the others!
These are my 3 hand held lasers with different colors.
I'm not a good beam shooter so this is my best!!
Three beam spots of 405, 445 and 520 --...
Can an old, dead, RF excited 12 Watt CO2 laser tube be
sent overseas? Seems this is old technology
but I'm not ready to find out if there's problems.
I posted this under gas lasers and got no replys yet.
Thought I'd try here.
I have an early Spyder III arctic. Steve used the newest diodes available then but I would like to bring it up to date with an M140 or a 9mm.
How the hell do you get it apart? I want to keep the battery condition diodes functional, jack the current and see it shine!!!!
Long ago, I got a kit for a BLU. It was supplied with
a 16.8 mm dia driver board for the single 18650 housing.
My tests indicate an output of only 1.3A @~5V (HOT).
I don't see any boost drivers with 3.7 V input and ~2.2A output
here. Is there anything new or do I need to fit a couple V5's?
I now have good old XP in my computer but it has no 7.1 sound card.
I looked at one today but it has no USB output.
What 7.1 card can I get to install in my computer to give me a USB output
to drive my ILDA system?