Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Search results

  1. GooeyGus

    505nm and 480nm diode RESULTS

    Anyone willing to sell me a blue? :D
  2. GooeyGus

    LaserPhysics Reliant 300WC help

    Doesn't work for mine, since for some reason I dont have a physical key! However... I did get this info: Pin 1: Remote interlock A Pin 2: Remote interlock B Pin 3: Tube Current Monitor Pin 4: Safe GND Pin 5: Tube Voltage Monitor Pin 6: Safe GND Pin 7: Force Idle - Pin 8: Force Idle + Pin 9...
  3. GooeyGus

    Omni-643 ar/kr remote pinout

    I know :P Was just hoping I might be able to squeeze a yellow line out of it or something! Gotta decide in the next few minutes if I even want to go through the trouble of going to look at it. Already have a whitelight laserphysics (that I still haven't played around with...)
  4. GooeyGus

    LaserPhysics Reliant 300WC help

    Any new info? Dont even necessarily need a full pinout, just need to know how to defeat the interlocks to get it powered up and lasing.
  5. GooeyGus

    Omni-643 ar/kr remote pinout

    Makes sense! Do these have external mirrors? it's only 150 bucks, but I'm not sure if I want another big ion laser for just a red line. Already have a garage full of 165's and 168's :eek:
  6. GooeyGus

    Omni-643 ar/kr remote pinout

    Oh one other question, what do you think about that model number? I can't find any info on it anywhere... it doesn't seem to follow the standard "RYB"-type naming convention as all the others I've seen. I can't even begin to guess what 643A-MOLD-A01 means.
  7. GooeyGus

    Omni-643 ar/kr remote pinout

    About 1800 hours, pics below! This is everything I have, but was pulled as a working setup. That's everything I have! Hope this helps
  8. GooeyGus

    Argon ionization color

    Hey I recognize that tube! Got way better pics if you need them, but the tube should glow light purpleish.
  9. GooeyGus

    Cyonics 2201-15SLB

    Not sure what your budget is, but I see these psus on eBay all the time for under 100 bucks. I picked one up for 50 a couple weeks ago. Just shop a bit and you'll find one. Also for what it's worth the power supply doesn't have to perfectly match the model number, so long as it's a cyonics...
  10. GooeyGus

    Omni-643 ar/kr remote pinout

    Hey guys, I've stumbled upon a whitelight omni 643 for very very cheap. I'm going to check it out tomorrow, and would love to try to power it up before handing the money over. Does anyone have the pinout info for the omni power supply that goes with the 643 head? Thanks! If I can't power it...
  11. GooeyGus

    LaserPhysics Reliant 300WC help

    Two of them are 1A (I assume for logic control stuff) and the other two are 20A
  12. GooeyGus

    LaserPhysics Reliant 300WC help

    Not sure which one it is to be honest... All the stickers were removed except the one I took a picture of. It DOES say 1W max, the head itself is about 2.5ft long. I know it is 240V single phase but that's about it.
  13. GooeyGus

    LaserPhysics Reliant 300WC help

    I got a stupid good deal on it, $200 on ebay. Figured it would arrive dead, but the tube is gas intact, so hopefully she'll light up. Been super busy at work and buying a house so haven't had much time to tinker with it. The last couple days I've been playing with my HeCd lasers and I got the...
  14. GooeyGus

    LaserPhysics Reliant 300WC help

    I've been looking for some time and cant find anything. If you know which pins to jump together to get it to start, that would help immensely!!! In the mean time, here are some pics of mine:
  15. GooeyGus

    LaserPhysics Reliant 300WC help

    Hey Guys, I think I also have one of these laserphysics whitelight units laying around. I've never tried to fire it up because I wasn't sure how to defeat the interlocks. Anyone know what I need to have in place at a mnimum for it to fire up? It has been sitting in my garage for the last year...
  16. GooeyGus

    FINALLY Got my little lasos argon working... (cool pictures inside!!)

    Fast forward 8 years.... Does anyone know the specs on the main ceramic capacitor on the starter board for this laser? I just pulled the laser out today for funsies and never replaced the starter cap I mentioned at the beginning of this thread. I did, however, remove it. SO now I have an open...
  17. GooeyGus

    Need help with potential white light Ar/Kr

    Ha! That's funny! I got this thing quite a while back and it just sat in my garage. I'm finally getting everything cleaned up, adding a dedicated 240V 60A outlet, and have a proper work bench so I'm excited to try to fire this thing up!
  18. GooeyGus

    Need help with potential white light Ar/Kr

    Hey guys, Need some help with this laser! Hoping someone has the pinout for the controller, as I have no idea how to fire this up. The tube IS gas intact, and has the correct color glow for an Ar/Kr. The mirrors also appear to be white light optics. No idea the brand or output or anything. Any...
  19. GooeyGus

    Holy @#$%... $100 488nm diode!!

    Re: Holy @#$%... $120 488nm diode!! As far as I remember, the flex is a buck/boost. It will run a 405/445 diode on a single lithium battery, just not sure of the current limits. I seem to remember that it was around 1.5A
  20. GooeyGus

    Holy @#$%... $100 488nm diode!!

    Re: Holy @#$%... $120 488nm diode!! Is DrLava out of the driver building game? I still have one of his little boost drivers somewhere around here.




Top