Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Search results

  1. Traxxtar

    Outdoor logo projection onto wall in daylight

    My company has a need to draw our corporate logo onto an outside wall in daylight. Every time I search for 'laser projection' all I find is actual business style projectors, etc. I know a laser light show style is what I need, but not sure what to call it. Ideas??
  2. Traxxtar

    Green Laser Line

    Yep, thanks. I need a line displayed in bright sunshine on the ground about 10' in length and about 10-15' from the laser. I'm guessing a 150-200mw laser would work??
  3. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    A couple of pliers later....I tore it all apart. I am now attempting to McGyver a new laser mount but the collimating lens doesn't fit quite right. Arg!
  4. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    https://www.ebay.com/itm/Laserland-40-89mm-532nm-200mW-Green-DOT-Diode-Laser-Module-Lazer-Diode-3VDC/132429969298?hash=item1ed570f792:g:r7UAAOSwmphaLV99
  5. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    The link is in post #10 in this thread. Thank you!!
  6. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    BTW, what's the best way to remove the diode/driver from the heat sink?
  7. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    Oh....now you got me thinking. If I could extract the diode module from that heat sink and thus only have the small diode and driver to work with, then my existing box enclosure for my HMI and micro controller could be reworked to put the laser inside instead of outside and fastened with a...
  8. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    For my purposes, the laser won't be on more than a few seconds at a time, certainly no more than 10 seconds. Mostly from 2-3 seconds.
  9. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    For that 200mW module diode on eBay you linked, couldn't I just remove an existing module from a housing I already own and insert that one?
  10. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    It seems very sturdy, all black aluminum with a copper or brass interior. It has a tripod mount hole as well.
  11. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    Admittedly I'm a bit new to lasers, so here's what I found. The packaging came with a label that showed 4.5v and rest was in Chinese. I tried the 5v and even 12v supplies and none worked. I then went back to their web site looking for more info. It showed (link below) that the 'working...
  12. Traxxtar

    Laserland 532nm 40x69mm 200mW - DOA

    Received a new laser from Laserland today. It appears to be decent quality, big black aluminum housing, but tiny thin wires for power and ground out the back end. Plugged into multiple 5VDC power adapters and it's DOA. No good. Bummer!
  13. Traxxtar

    Green Laser Line

    My request is different from the original post author. I don't need a double-ended laser. Just a laser pointer style with a LINE lens. My concern is the power level needed to be seen in broad daylight. I'm hoping I can drive a powerful enough laser with just 5VDC. Anyone know where I can find a...
  14. Traxxtar

    Green Laser Line

    The laser will be mounted on a rail about 34" above the ground and shine down at a 45 degree angle and draw a line about 10 feet long. So the working distance would be less than 15 feet I suppose. I haven't actually done the math to work out the exact specs.
  15. Traxxtar

    Green Laser Line

    About 10' in line length. The surface for the line to be displayed on will be sand, like beach sand.
  16. Traxxtar

    Green Laser Line

    I too need a Green laser with a LINE lens for outdoor/bright sunlight viewing. What is the minimum power laser I could use to accomplish this and where might I buy one? Thanks!!







Top