Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Search results

  1. MadEye

    [Done]Looking for X-Boost with soft start

    [EDIT:] And its done... Magically while this thread was confirmed I got a PM from Lazeerer :) Hi, I´m looking for a X-Boost 1.8A with the SOFT START feature. No matter if its squared or round, it just needs to fit on top of a C6 Pill (Im using a extendet build with a giant heat sink). Since...
  2. MadEye

    Extended S4 Host

    Hi everyone. After I failed my Arctic Modification Project (1V loss at the tailcap using a boost drive... This host should just be locked away) I started searching another host which works of a 18650 and has good heat sink capabilities. After searching I came across "lazeerer's Personal C6" and...
  3. MadEye

    Arctic Mod - Protected 18650?

    Hey! I want to start my "improved" arctic build and just dont get an idea how to make it possible to use protected 18650s in it. What I got so far: -The spring is not the problem (The battery touches the black plastic part before the spring is completly in -Looks like its impossible to open...
  4. MadEye

    Thorlabs Beam Block LB1

    Hi Guys, I know there are many easy ways to build a beam dump yourself, and actually for the "low power lasers" we are using there is no real need for a beam dump, but I always wanted a professional one, and when I found the Thorlabs LB1 fpr 42,20€ (about 56$) I really could not resist cause...
  5. MadEye

    38mA out of 2 AAAs?

    Hi Guys, I cant find any solution for my problem, so I just try to ask you :) I got a weak 10mW red diode and want to put it into a Pen Host I got here. The datasheet says at 10mW the Diode drains about 32-38mA at 2,2-2,5V. Im going to power it with 2 AAAs, so I got a Voltage of 3V... First I...
  6. MadEye

    Aixiz Glass Lens Issue

    Hi everyone, I noticed something weird with my last charge of Aixiz glass lenses for 405-445nm Lasers. The first lenses I ordered (from cajunlasers) are pretty good and I love them. Unfortunately they got a little bit dirty after some time and I also needed some for red, so I ordered new ones...
  7. MadEye

    Flexdrive V5 Manual(s)...

    Hi everyone, While Im waiting for my new diodes to arrive I just noticed something strange. When I looked the first time on the Micro Flex Drive V5 Manual I noticed I can not set it directly to 420mA (I guess all of you know which diode it will be ;)) because there was a gap of a few mA...
  8. MadEye

    My first 445 - And its a Labby!

    Hello everyone! I already had a Thread here about my Cooling, and now im finally finished! I decided to build my first 445nm Laser as a Labby because the highest powered laser I ever used was a 200mW Red and I first wanted to get some experience with the 1W power. At the moment its run at max...
  9. MadEye

    445nm Cooling - TEC or not?

    Hello everyone, I´m new in this Forum, was reading for some time and now I have a question and need your help. English isn´t my mother language so please excuse any bigger mistakes and don´t punish me ;P. At first, yes i have safety glasses (OD4-5) and experience with high powerd handheld...




Top