Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Thanks for supporting LPF!

Avery's Instagram | Open Source Cybersecurity Software by Avery | Considering selling LPF, DM if interested

Search results

  1. LuxorLasers147

    My 150mw and 50mw Laser!

    I also started with blu-rays for some reason. Not as defined and visible beam compared to other colors but they burn the best! I remember the first time I saw 1W of blue, it will blow your mind :D
  2. LuxorLasers147

    Looking for a Recommendation on Quality High Discharge 10440 Batteries

    Can´t find those sellers. I used advanced (search), search by seller, and no results...
  3. LuxorLasers147

    The ABSOLUTE Cheapest Proper Diode driver

    If you put it inside a pen and fully insolate the module it will build up heat very fast no doubt. Also in your pen build the module is sticking out so it doenst have a chance of dispersing the heat through the body. There is a way to isolate it inside a pen but still let some of the heat...
  4. LuxorLasers147

    The ABSOLUTE Cheapest Proper Diode driver

    Nice thread for beguiners :) How does that diode compare to the old LPC-826? or is it the same?
  5. LuxorLasers147

    The ABSOLUTE Cheapest Proper Diode driver

    I used to do this alot also with the 380A chip. I would suggest using at least a ceramic cap otherwise it wont last you as long! Also keep in mind that this driver is + continuous, so you have to insulate the module from whatever host you put it in. :)
  6. LuxorLasers147

    Help choosing RGB LED

    Ended up learning quite a bit about LED light. Thank you all for the input! :)
  7. LuxorLasers147

    Help choosing RGB LED

    Well, I get what your saying, diferent wattages with diferent light sources might produce the same intensity of light. From what i´ve seen, Wattage is used verywhere even with LED Bulbs as "power rating" and due to selling point of view. The only place i see the lumens rating is when buying...
  8. LuxorLasers147

    Help choosing RGB LED

    Hi! :yh: I just found this old halogen lamp and I thought about installing a remote controlled RGB LED bulb to either light up my room or to set a specific mood :) I found hundreds of led bulbs on ebay but since it will sit inside the parabolic dish the IR remote might not work ?! Also, I...
  9. LuxorLasers147

    NDB7675 1.9w 470nm Pen laser made by Alien Laser) LPM reading added

    Re: NDB7675 1.9w 470nm Pen laser made by Alien Laser :D I´d love to own one of those, that´s insane man! :eek: Maybe you could use a wet cloth and place it beneath the business end to cool it long enough to have a full reading, it wont be a true reading but that´s what I would do :p
  10. LuxorLasers147

    Comple 1.5W 445nm Laser Pointer using 502b host.

    Hi Imraneesa :) Back in 2011 I built my first 445 in that host!! After looking at hundreds of 18650 hosts, this one caught my atencion.. It just looks awesome shooting a bright blue beam and like Redcowboy said, the belt clip makes it uncommon and I think better looking than it´s cousin, the...
  11. LuxorLasers147

    Tiny red laser

    Nice pocket laser :) this one is pretty close to the first one i built, but i had to use a flexdrive instead of a linear like the amc... how did you insulate the module?
  12. LuxorLasers147

    Driver for 100mw Rated 532nm Module

    If it were a true 100mW then 700mA from a AMC 7135 driver (2x chips) would be perfect, you could run it with a single li-on, minimum heat, and continuous positive. I a "100mW" module from a dealextreme pen running at 700mA in a C6 for about 2 years now..
  13. LuxorLasers147

    Now Polished HS! The Bastard: 445nm 1.9A UltraFire KF-T60 Host-PIC HEAVY AND VIDEO

    Re: The Bastard: 405nm 500ma UltraFire KF-T60 You had your diode connected to the driver while setting current? Yeah i grabed a benboost from moh at the beginning and it killed one of the two 12x i had.. But aside from drivers and current spikes and all that, I was talking in general about...
  14. LuxorLasers147

    Now Polished HS! The Bastard: 445nm 1.9A UltraFire KF-T60 Host-PIC HEAVY AND VIDEO

    Re: The Bastard: 405nm 500ma UltraFire KF-T60 I have to warn you man, my 12x died after 2 month of daily use at 500mA. It did not matter how well heatsinked it was it just died. Some dont even last an hour at that current, 450mA seems to be best for longer life.
  15. LuxorLasers147

    CLOSED : GB : Lazerer like - manufacturer - Lasers Group Buy $25 - $100 :-)

    Re: GB : Lazerer like - manufacturer - Lasers Group Buy $25 - $100 :-) Go ahead and put me down for a LZCR 200mW 532nm plz :)
  16. LuxorLasers147

    What do you guys think about this host?

    If you´re thinking about breaking someones teeth with it, you might be interested in this one :crackup: Durable Baseball Stick Style CREE Q4 WC 180LM 3-Mode LED Flashlight (1 x 18650/3 x AAA) - Free Shipping - DealExtreme
  17. LuxorLasers147

    1.5W M140 Custom Built - Single 18350

    Lucky bastard :eg: How long is the batt life at that current?
  18. LuxorLasers147

    1.5W M140 Custom Built - Single 18350

    How did you get your hands one a x-boost? I want one sooo bad :o
  19. LuxorLasers147

    M140 driver for C6 cree build

    Yeah their fine for 445 diodes. But I wouldnt dare to power a 12x with one of these without a safety cap though.
  20. LuxorLasers147

    M140 driver for C6 cree build

    You know what? Just had the safety cap and dont worry about resistors, the driver will output 1.25A stock wich is around 1W with 3 element glass lens :beer:




Top