Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Search results

  1. FlightLevel350

    100-200mw green 532nm 3v module LPM Results listed and shipped in/from USA IN STOCK

    I did a few tests with a 1N4005 diode in series with the battery. The module was pulling about .81 amps, with a voltage drop of .9v across the diode. I was using a fully charged battery at 4v so that gives me about 3.1 which is about right for the module. The diode did heat up a bit but its...
  2. FlightLevel350

    100-200mw green 532nm 3v module LPM Results listed and shipped in/from USA IN STOCK

    Mine arrived today, the front lens was a little loose so I need to tighten it up but otherwise it looks good. If I wanted to use it with a 3.7-4.2 rechargeable, would I just add a diode inline with the battery to drop the voltage down?
  3. FlightLevel350

    NMB-MAT 12vdc Brushless PWM Fan Great for Laser Boxes

    Have you ever tried turning them on all at once? I have some old Nortel switch fan units that have 10 120mm fans in them and they move ALOT of air. I use them as ventilation for my room. :crackup:
  4. FlightLevel350

    DTR's Laser Shop: Diodes-Drivers-Lenses-LEDs & More

    Re: 445 1.5W-2w Diodes $40 Shipped US Lens and diode arrived today, Thanks!
  5. FlightLevel350

    1W 445 driver

    I see. Thanks that helps a lot. I guess this is meant to be in a case positive host. If I wanted to set it up as a case negative, I would need to omit the case pin when I connected it to the diode. Edit: For anyone else who wants to set this driver up for a case negative host, here is how I...
  6. FlightLevel350

    1W 445 driver

    I got this driver from Modwerx, but before I wire it up I want to make sure I'm connecting it properly. Does anyone know where the positive and negative pads are for this driver? There are 3 pads, but none are labeled clearly. One appears to have a B+ near it which I thought might be the...
  7. FlightLevel350

    GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 **ARRIVED**

    A replacement set would be nice, since it appears to be assembly error on the part of the manufacturer that caused the part to come off. Its difficult to see in the pic, but it looks to me like 1 or more of the pot's leads are broken off, which would make it very difficult to re-solder...
  8. FlightLevel350

    GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 **ARRIVED**

    I think I've figured out what the dip switches are for. These galvos work with DMX I believe, so the switches must be where the DMX address is entered. I do not have a DMX controller to verify this, but it makes sense. The DMX standard also calls for a five pin connector, so I think the 5pin...
  9. FlightLevel350

    GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 **ARRIVED**

    I don't mind waiting, as it is I have bits and pieces I need to assemble and a whole ton of other stuff to buy, so I probably wouldn't even be able to use it when it arrives. Thanks for the updates swim.
  10. FlightLevel350

    GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 **ARRIVED**

    This is great news, I cant wait to get my hands on mine and start putting some stuff together! Thanks for all your hard work swimm.
  11. FlightLevel350

    The REAL Kryton GB round #3. Taking payments now.

    Hey Kenom, just letting you know that my Groove arrived today. It looks great, apart from a few defects in the anodizing. I can't wait to get a 445 in this thing and fire it up! BTW, where did you get the clicky switch? I might be needing one for a different build and I like the feel of this...
  12. FlightLevel350

    FS: New AP Digital light Spirograph WORKING - $120 shipped **SOLD**

    Re: FS: New AP Digital light Spirograph WORKING - $120 shipped I have one of these I built myself using Digital Light's board. It is the first version that uses just manual or automatic. The second version looks like it has quite a few new features. Good luck with the sale
  13. FlightLevel350

    GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 **ARRIVED**

    Re: GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 I haven't been able to fully test it with a laser or galvos yet, but it worked very well when I tested it with audio files. Once I get the galvos set up it I'll know more.
  14. FlightLevel350

    GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 **ARRIVED**

    Re: GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 I got a correction amp from drlava and set it up with a usb sound card without any problems. Having the scope really helps in setting the levels up, a multimeter just isn't fast enough.
  15. FlightLevel350

    GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 **ARRIVED**

    Re: GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 Put me down as well. Sorry if I wasn't clear about that in my first post.
  16. FlightLevel350

    GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 **ARRIVED**

    Re: GB: Low Cost 15K Scanner Galvo Set with DMX & ILDA Complete - $75 How reliable are these? I was tempted to get some 20k sets some time ago but couldn't justify the cost. If these are of decent quality I will be down for a set. Since they are 15k, I would imagine beam shows and text are...
  17. FlightLevel350

    FS: Solarforce L2P Heatsink

    Bump. Price reduced to $30
  18. FlightLevel350

    FS: Solarforce L2P Heatsink

    Nope just the heatsink.
  19. FlightLevel350

    FS: Solarforce L2P Heatsink

    This is a heatsink for the Solarforce L2P host. When I made it I didnt measure the length correctly so it was cut off .22 in too short at the head. You can see in the picture how it doesn't extend far enough out. I included a correctly sized heatsink in the last two photo for comparison...




Top