Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

What a cheap laser can do, Beware!

WizardG

0
LPF Site Supporter
Joined
May 9, 2011
Messages
1,170
Points
113
Hi WizardG
I also grew up in the boonies-the Sierra. I was taught respect and gun safety from an early age-never point at any one at any time, keep the safety on-don't shoot at rocks-etc. I was plinking with a single shot 22 at age 11 with 22 shorts. Then it was clean the rifle. I had a hill to shoot into. Many cans and pinecones met their fate!
I treat lasers the same way- although I've yet to zap any pinecones or cans. :)
Laser pointers are not kids toys. Originally, it was 1 mW 650 nm. Relatively lower hazard.

Only more recently have the crappy 532 nm taken off. Elsewhere I describe trying to buy an actual 1mW 532-and getting a way over spec pen-that makes my eyes ache just viewing the dot on a wall-not for presentations!
Solved that need with a 505 nm from Laserlands. Probably less than 5mW. It's a direct diode and the beam spot is larger than the DPSS 532-and of course no splatter of IR either.

From the manufacturer's point of view making a 532 DPSS laser that is reliably at or under 5mW is a pain in the neck requiring a more complex driver with APC feedback. That adds to the cost of manufacture as does the requirement for someone to adjust each pointer to the correct power. And often the darn things just aren't stable at very low power. Much simpler to just stick a generic bonded MCA in front of a 500mW diode and call it good. Nice and bright=positive customer feedback and it's dirt cheap to produce. I've paid less than a dollar a pop for poorly made pointers out of china in batches of 10. Most of them actually lased.
 





Joined
Jul 1, 2018
Messages
306
Points
43
Thanks! I wondered why it was cheaper to make over spec than actual "safer" 532 nm. I've mentioned that I bought from Laserlands for a presentation pointer-opting for a 505 nm-for color-and because it's NOT DPSS. + REP if I can give it.
QUOTE=WizardG;1546246]From the manufacturer's point of view making a 532 DPSS laser that is reliably at or under 5mW is a pain in the neck requiring a more complex driver with APC feedback. That adds to the cost of manufacture as does the requirement for someone to adjust each pointer to the correct power. And often the darn things just aren't stable at very low power. Much simpler to just stick a generic bonded MCA in front of a 500mW diode and call it good. Nice and bright=positive customer feedback and it's dirt cheap to produce. I've paid less than a dollar a pop for poorly made pointers out of china in batches of 10. Most of them actually lased.[/QUOTE]
 

Benm

0
Joined
Aug 16, 2007
Messages
7,896
Points
113
Much simpler to just stick a generic bonded MCA in front of a 500mW diode and call it good. Nice and bright=positive customer feedback and it's dirt cheap to produce. I've paid less than a dollar a pop for poorly made pointers out of china in batches of 10. Most of them actually lased.

Yeah, that's the problem. The cheapest way to make them is doing as you describe and then ship out those units that lase at all (if they do quality control at all).

Then again, most customers would probably be disappointed if you actually delivered them a 532 nm laser with a power guaranteed between 0.9 and 1 mW even over a wide temperature range.

Such a product would be superior and more complex to build. But I bet the vast majority of buyers would actually complain about it being far dimmer than something they got off ebay for $0.99 shipped.

It's also customs that creates this problem though: if you want to import something as a 'pointer' it'd probably have to be < 1mW. Manufacturers are happy to supply to print labels that state this, regardless of output power, so their product is legal to import on paper.

I'd personally be alarmed to see a package weighing in at a kilogram and showing an enormously large laser (like a 3D-maglite sized thing) on x-ray inside of it. Then again, even on x-ray it may not look suspect if it's aluminium - given the low atomic weight aluminium just looks like plastic with simple x-ray scanning.
 

Durge

0
Joined
Dec 23, 2017
Messages
29
Points
3
Gotta say I disagree completely with H20 on the argument of responsibility. This is not the fault of the mother. The article said the laser was sold at a well known toy store. You buy a toy at the store, tell your children not to eat it or stick it in their eyes, and that's the best you can do. I mean, they sell playdoh and elmers glue that are specially formulated so as to not cause harm when children inevitably ingest the stuff, as they are bound to do being young and curious. This issue is the responsibility of the store, not the mother. You said it's so easy for the mother to google the dangers of a laser. Why? Why would I google the dangers of a barbie doll or playdoh? I bought this toy at a reputable toy store with the expectation that said toy is suitable for play. They even make edible blowing bubbles at this point. Kinder eggs were banned in the US because they were considered dangerous. When I buy something from the toy store, I have an expectation within reason that said toy will be safe to give my child, especially if it's a "well known" toy store, such as the one in the article. Packaging usually has warnings and suggested age ranges.

The responsibility undoubtably falls upon the seller of the item in this case. The seller tried to make a profit by selling incorrectly labled Chinese junk, and put potential buyers at risk. That's tantamount to selling faulty batteries on purpose simply to make a profit. The potential harm was magnified by the fact that the laser was being sold at a toy store directed at children. This was a case of seller greed and seller negligence, not a negligent mother that was unfit to have children. The insults directed at whether she was fit to be a mother are unfounded. None of you have enough facts about the situation to make such a negative determination.

Atleast she took her son to the doctor to get the issue checked out. Atleast she alegedly warned her son not to look straight into the beam of the laser. Give the mother some credit for that, I couldn't even afford to go to the doctor the majority of my upbringing. Telling the son not to look into the beam was just common sense, like not looking directly at the sun or standing 2 inches away from a huge tv screen. It doesn't mean being out during the day or watching tv in general is severely dangerous and warrants a google search into the dangers of being within the viscinity of such things; that explaination is absolutely ridiculous! The expectation is that being outside and watching tv are generally harmless activites, like using that mislabled laser bought at the "reputable" childrens toy store.

I hear you guys when you express concerns about how these reckless, negligent, or greedy situations harm our hobby. On the topic of policy and law, it's difficult to make policy that fits every situation. The root of the issue is lack of education on the subject, and certain shady sellers attempting to sell items that are mislabled. There will always be those who are deceptive about the products they sell, their motivation is profit. A commenter before me was correct to say that sensationalizing these issues will only make for tighter law enforcement on the issue, which won't really eliminate the illegal or less-than honest sale of lasers, but make it harder for enthusiasts like ourselves. I would probably argue for better labeling and more clear warnings on products, more accessible education on the subject for the public, and potentially less strict laws. The reason I say less strictness is because the sellers from China know what output power means, and they know what class laser is legal to sell in the states; they probably even know the average output power on most of the devices they sell. The big issue is that they are motivated by the laws and regulations to lie about that number, maybe saving money in not testing each individual product, but mostly to circumvent the regulations alltogether. Lasers, unlike illicit drugs, actually have value and aren't inherently harmful to own. They can be fun, and they add immesurable value to our lives when paired with other technology. These types of considerations would be valuable to those who make the policies. Maybe this is all a bit idealistic of me, but I stand by what I have said.
 
Last edited:
Joined
Nov 2, 2012
Messages
626
Points
43
This is a necro-post but just saw this thread and figured would be worth it to remind everyone that most standard safety glasses won't protect against injury from most of these DPSS greens due to passing the IR beam that is superimposed on the green beam. Only exceptions are if the laser includes an IR filter or the glasses are specifically rated for IR. Otherwise the full IR beam will pass (and do full damage) unimpeded. Be careful!
 

loreadarkshade

Well-known member
Joined
Dec 14, 2020
Messages
318
Points
63
This is so very sad....
I've done some stupid things in my life too, and thank god the repercussions were not so bad. (firecrackers giving me tinnitus)
Imagine a stupid 2 second moment of curiosity ruining, changing your life forever. wow...

I don't blame the mother, how could we? Had she had known, I know in my heart she would have never let her child play with this.
We know the dangers of lasers, but she had no idea what lasers are capable of.
We see high powered lasers burn things, we use goggles every time we use our lasers, its second nature to us. We take this for granted.
Of course she thought it was safe, it was sold publicly in a children's toy store..

I blame chinese manufacturers and retailers who lie about their laser's power and sell overpowered products because they sell better...
 

CurtisOliver

0
LPF Site Supporter
Joined
Jun 12, 2015
Messages
7,594
Points
113
The manufacturer takes partial blame for this if the laser was overpowered and deemed unsafe. However so does the parent. Misuse comes under the parent’s responsibility. There are plenty of products out there for children that are safe for them to play with under proper and supervised usage. Play sand for example is deemed safe for them to use but if the parents allow them to eat it, then it’s not the manufacturers fault. Colouring pencils are safe, unless a child decides to poke one in their siblings ear. Who takes responsibility for that. The parent or the manufacturer that sold a long pointy object?
Even if the laser sold was legitimately Class 2, you still are not meant to stare into the laser emission anyway so it is deemed misuse of the product. The parent should be aware of what they are giving their children. And common sense should tell a parent that bright lights hurt eyes.

Manufacturers get out of legal trouble when they put safety information on their products. In this case the label on the laser would of stated ‘Do not stare into the beam’. Even if the class rating was wrong that key statement may be enough to get them off the hook. They may still face legal troubles separate to the case for selling lasers exceeding their safety class. But the case alone would end up being the mostly the parents liability.
 
Last edited:

loreadarkshade

Well-known member
Joined
Dec 14, 2020
Messages
318
Points
63
Totally agree!
A little common sense goes a long way. The kid was stupid for doing it and not listening to his mother.
Just a shame all around...

In the article, it said she had warned him not to shine it in his eyes, and he did so anyways while she wasn't looking.
It only took seconds to burn his retina, and of course he felt no pain while being blinded, and tried it in both eyes.
You know kids, you tell them not to do something and they do it...

I think it's easy to blame someone when our hobbies / something we love is threatened or shown as bad / negative.

I think the mother will blame herself for the rest of her life, and so will the kid, but why sell this crap in a toy store?!
 

Unown (WILD)

Well-known member
Staff member
LPF Site Supporter
Joined
Sep 4, 2020
Messages
1,370
Points
113
Lack of education is a major issue. A child's brain is not fully developed enough to protect themselves from potential situations. It's up to the parents to watch out for them. The mother knew enough to tell him not to look directly into it. She is largely at fault. The rest of the blame goes to the shop selling it as a toy.
She wants to ban the lasers but that isn't the solution. Education is. It should be treated as a gun and sold accordingly.
 

Ears and Eggs

0
Staff member
LPF Site Supporter
Joined
Oct 1, 2007
Messages
2,858
Points
113
There's mistakes on both the parent and the store here. Sadly the kid paid the price. As others have said, kids could choke on Lego, break bones on a scooter, etc. No toy is 100% safe and it's the parents responsibility to monitor the kids behavior and stop overly risky behavior. Parents should also not be buying anything for their kids if they don't have a sound understanding of the risks and safety precautions themselves.

On the other hand the toy store is negligent for selling something that dangerous. No toy store would sell a Desert Eagle or a case of dynamite. Even though under some circumstances, under very strict parental supervision, a kid could use those.
 
Last edited:

40mikemike

New member
Joined
Sep 21, 2022
Messages
4
Points
1
Hi BBB,
Thanks for sharing , I blame the mom :tsk:for purchasing the pen for a 9 yr old who has no idea about safety with them. All they see and think its a light and has no idea of the ramifications of the beam and what it contacts. Prayers go out to the boy maybe a recovery down the line hopefully .

Rich:)
I think it was 75% mom and 25% the kids, because at that age, I had a 22lr and a bow. I think the kid could have been more responsible. The mom should have looked at what she bought for the kid, and the kid should not have ignored the safety labels embedded on the laser itself. The saddest part is they are not admitting that it was their own fault and instead blaming it on the laser. The same happens with guns all the time. People blame inanimate objects for shooting somebody or in this case, blinding a kid. Now she is going to go on a rant about how the lasers should be banned and how it is too powerful and some people on the internet are going to eat this bs up like a fat person at a 3-course buffet and start spewing the garbage to others making so sort of dumb movement to "ban all deadly assault lasers" then people like us will be deprived of our freedom to build and point lasers at crap. Thats exactly what's happening with guns in America.
 

40mikemike

New member
Joined
Sep 21, 2022
Messages
4
Points
1
Would you consider yourself the exception, or the rule? If I handed a child that had no experience with firearms a loaded M1911 with a broken safety and said "here, go play. Just don't look down the barrel", I would hope that someone would object.

Kids are curious. They do stupid shit and that usually means they have to learn a painful lesson. That doesn't mean it's okay to give them something you yourself know very little about and then say "it's the kid's fault" when they end up permanently injuring themselves.
Yes, but you teach the kid safety. I got taught firearms safety when I was 6 years old on my birthday. I got a Ruger 10/22. Before my dad even handed it to me, he had engraved firearms safety into my brain. I got a bow at 8, same safety rules apply. I apply the same with lasers, but you have to be aware of smooth surfaces for reflections. No one gives their kid a 1911 and just says don't look down the barrel. If you are giving your kid a gun, its best to start them with a pistol caliber carbine or a 22 pistol. Sit them down and make your voice sound as serious as the situation is. Don't just be like "Oh, you just keep your finger off the trigger keep it unloaded when not using and be aware of what your target is and what's beyond it. Make it ENGRAVED in their brain. Make them recite it back to you like 20 times and they cannot get it wrong once; if they do, keep making them memorize it till it penetrates their thick skull and into their puny brain. No one should give their kid a 300mw laser without sitting them down putting your most serious voice and talking them through Safety, how it works (even if it is a crude example like push the button and the light turns on) and how to use it properly and what surfaces are a no go like a refracting chandelier or a mirror or shiny metal.
 




Top