Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Recent content by TheWors3

  1. T

    Review of JetLasers 465nm 1.4w PL-E Mini

    Thank you! Yes, sorry. Everytime I try to say multimode I end up writing multidiode. Thanks for correcting me!
  2. T

    Review of JetLasers 465nm 1.4w PL-E Mini

    Thank you!
  3. T

    Review of JetLasers 465nm 1.4w PL-E Mini

    It is a multidiode laser so it has a rectangular shape, but you can get fooled that it is single mode (even more with how clean the dot is) unless looking at the dot I would say 20 meters+. Edit: multiMODE not multidiode, sorry.
  4. T

    Review of JetLasers 465nm 1.4w PL-E Mini

    Thanks, as I told Radim the reason for that should be the divergence of the laser itself. Basically the divergence on 473nm and 532nm is pretty low and even when expanded 10x at the output there is not going to be a lot of difference. It will be quite hard to choose where to focus the expander...
  5. T

    Review of JetLasers 465nm 1.4w PL-E Mini

    Thank you, I took a few images of my 445nm 1w guardian before so i'm going to upload a comparison whenever I can. Thanks! I think this laser will stop working at around 40% total battery, but i'll update the review with a proper test of both battery types in a few hours. Right now i'm using...
  6. T

    Review of JetLasers 465nm 1.4w PL-E Mini

    Hi, this is my first review so please take it easy :D There is already a review of this laser and it's really good, I just wanted to write about my own thoughts on it. I already had many lasers and I spent a lot of money on them. I was interested in the wavelength of 465nm, but when I looked...
  7. T

    Does this look normal?

    Yeah, it's kind of like that, I realized I got some school glue lying around and that the caps could go with the laser almost perfect, took three for the three lasers I have and did a hole at the top, used electrical tape so the cap could fit the laser better and this is the result. Good thing...
  8. T

    Does this look normal?

    I mean you can see the pattern "move" but the splash on both sides stays stationary, pretty sure is not dirt. I sent a message to laserbtb and they said is not dirty, just the way laser diodes behave. I made a ghetto mod with a school glue cap and worked perfectly on removing that, so i'm...
  9. T

    Does this look normal?

    I've sent them a message so I'll wait for an answer, thanks. Yes, I wondered about that and since all three lasers I bought are focusable I realized that the splash stays stationary on all three so pretty sure the focus itself its clean
  10. T

    Does this look normal?

    So then there is no way to fix it I guess :cryyy:
  11. T

    Does this look normal?

    Oh, well, I tried cleaning it off but nothing happens so I'm practically sure that if its dirty, it's on the inside. I feel bad for buying three expensive lasers and come with this as a result There is no way I can access the inside of this laser to clean it, right?
  12. T

    Does this look normal?

    I think they look smaller now, i hope its ok. I thought so too, but I was surprised to see this out of the box, even worse I bought two other lasers aswell handheld, the 635nm and 450nm and both of those have the same issue. Yes, I will look for that, thanks. I hate the fact that the cap...
  13. T

    Does this look normal?

    Hi, I recently bought a HL520 50mw from Laserbtb and I was wondering if the way the dot looks is normal, because I have a 532nm LP and it looks fine, just the dot and nothing else. Example: If it's not normal, what should I do?




Top