Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Wicked lasers designing a LPM

Joined
May 31, 2009
Messages
3,239
Points
63
I know they have said in the past that they are gonna be selling LPMs, but this is looking more promising...

202296_10151238017579115_1380908519_o.jpg


Oh wicked lasers.... you so stupid.

338739_10151240726854115_205141267_o.jpg


I'm not sure if its a thermopile... but that design with the thermopile inside the case seems like its gonna give inaccurate results.

But if it was an optical sensor... That might mean that only low power lasers can be metered... which kinda works out nicely for them, but is pretty much retarded if they wanted to sell large quantities of them.

-Adrian
 
Last edited:





Joined
May 31, 2009
Messages
3,239
Points
63
I'm wondering if those 4 pads on the left side are for USB connections for data logging and stuff :D
 

Things

0
Joined
May 1, 2007
Messages
7,517
Points
0
If that top view of the PCB is anything to go by, it's not USB. But there could (and probably is) more circuitry on the underside.
 
Joined
Apr 1, 2012
Messages
199
Points
0
If they are anything like i've heard from most people on here, seems that they may try to use this as a gimick (using a purposely miscalibrated lpm to show higher powers and if someone teets it with another lpm and gets lower results they can claim that the person's lpm is miscalibrated/wrong)
 
Last edited:

Grix

0
Joined
Dec 9, 2008
Messages
2,190
Points
63
One would think that WL is shooting themselves in the foot with this one.. I mean, half their lasers are somewhat underspec, right? Now their customers will know too.
 
Joined
Jan 29, 2012
Messages
3,164
Points
113
If they are anything like i've heard from most people on here, seems that they may try to use this as a gimick (using a purposely miscalibrated lpm to show higher powers and if someone teets it with another lpm and gets lower results they can claim that the person's lpm is miscalibrated/wrong)

I was thinking something very much along the same lines...Finally we might start seeing some 1 W Kryptons and Arctics! ;)
 
Joined
May 31, 2009
Messages
3,239
Points
63
One would think that WL is shooting themselves in the foot with this one.. I mean, half their lasers are somewhat underspec, right? Now their customers will know too.

That was my exact thought too...

Anyway, these could possibly be good to hack and improve on which would be cool.... But knowing Wicked lasers... the LPM will probs cost $1000+
 
Joined
Sep 20, 2008
Messages
17,622
Points
113
It seems like on optical LPM to me as well...

On this WL page they let the cat out of the bag I think...

Troubleshooting

How do I know that my handheld laser is delivering its full advertised power?
Measuring the output of a portable handheld laser is relatively easy. We use a Coherent LaserCheck Power meter, along with other laboratory equipment, to ensure that laser output is what we say it is. If you would like to check for yourself, you can obtain a Pocket Laser Power Meter from websites such as eBay. You can also visually compare our laser modules to a >5mW green laser pointer to see the dramatic difference
They must have hired a guy in Austin Texas to try and
reverse engineer their in house Coherent LC LPM...

@ Bobhaha...
Do you have a link to where you found that info on the 1st post...


Jerry

You can contact us at any time on our Website: J.BAUER Electronics
 
Last edited:
Joined
May 4, 2009
Messages
2,238
Points
83
One would think that WL is shooting themselves in the foot with this one.. I mean, half their lasers are somewhat underspec, right? Now their customers will know too.

That, OR they're making these so that they give readings much higher than what is truely being measured and they make their lasers look that much better.
 

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
That, OR they're making these so that they give readings much higher than what is truely being measured and they make their lasers look that much better.

I am thinking the EXACT same thing, the arctics will show at 1W but when measured on a calibrated meter it will be closer to 600-800mw, imagine of
The output of that meter was just x2'd so a 500mw arctic is 1000mw :eek:
 
Joined
Oct 14, 2011
Messages
2,369
Points
83
I am thinking the EXACT same thing, the arctics will show at 1W but when measured on a calibrated meter it will be closer to 600-800mw, imagine of
The output of that meter was just x2'd so a 500mw arctic is 1000mw :eek:

That would not be a problem as this will become known to everybody..

Greetings,,
 
Joined
Oct 23, 2007
Messages
1,904
Points
0
It most likely connects to the headphone port of an iPhone or android phone for mobile graphing.
 

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
Yeah but then they'd have to get the app approved in the app store & all that fiasco :p they'd probably charge for the App aswell :(

Although mobile graphing sounds cool.
 
Joined
May 31, 2009
Messages
3,239
Points
63
Yeah, actually now that you mention it spyrorocks, that cbmvmvmvmvmvnvbfvnvmvnvnvvm guy once said that's what they wanted to do.

AnthoT, it won't be hard at all for andriod.... apple on the other hand :/

Jerry from their facebook page.
 
Last edited:

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
Yeah, actually now that you mention it spyrorocks, that cbmvmvmvmvmvnvbfvnvmvnvnvvm guy once said that's what they wanted to do.

AnthoT, it won't be hard at all for andriod.... apple on the other hand :/

Jerry from their facebook page.

Yeah, android is easy, apple will give them a hard time as usual :p
 




Top