Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Proper Driver set up?

Joined
Nov 18, 2013
Messages
50
Points
0
Hey guys, Can anyone walk me through the proper way on how to set up a BlitzBuck V4 to about 1.7A with a DMM?

Also I plan on running it off of 2 x CR123A batteries, would this work for powering a M140 Diode?

Thanks in advance guys I'm still in the process of learning.
 





Tmack

0
Joined
Oct 13, 2013
Messages
2,478
Points
0
You're going to need lithium ion 3.6v. 16340 or 18350.
The 3v will not work. And most driver supplier will preset your current. I am not familiar with how to set it myself as I have been spoiled :D
 
Joined
Oct 5, 2009
Messages
811
Points
28
You'll need to buy or make yourself a test/dummy load to set the driver to your desired current.
 
Joined
Nov 18, 2013
Messages
50
Points
0
But isn't 2 of these batteries (CR123A) 6V?

And I think it will be preset to the min ~1.5A in not sure tho
 
Joined
Nov 18, 2013
Messages
50
Points
0
You'll need to buy or make yourself a test/dummy load to set the driver to your desired current.

This is where in in still very green.. Why is it that I can't put the leads from the DMM to the driver and set desired current?
 

Tmack

0
Joined
Oct 13, 2013
Messages
2,478
Points
0
Go to dtr laser. Look around. Check out M140 pre-wired driver module.
 
Joined
Nov 18, 2013
Messages
50
Points
0
This are the ones I'm using it's a sweet package. I'm just confused as to how to setup the driver properly and what batteries non rechargeable batteries will work :)
 
Joined
Oct 5, 2009
Messages
811
Points
28
This is where in in still very green.. Why is it that I can't put the leads from the DMM to the driver and set desired current?

You need something to mimic the diode in order to set the current accurately. It might be better just to get a preset driver.
 
Joined
Nov 18, 2013
Messages
50
Points
0
You need something to mimic the diode in order to set the current accurately. It might be better just to get a preset driver.

Would you recommend the 1.8A that Skeez used as opposed to the BlitzBuck V4 just for ease if set up? I know the Blitz is fairly new.
 

Tmack

0
Joined
Oct 13, 2013
Messages
2,478
Points
0
Absolutely. Preset is so much easier. Solder to leads and go. If you looking for the same results as skeez , I would follow it to the word.
 
Joined
Nov 18, 2013
Messages
50
Points
0
They are the same price.. I think it would save me head aches and money because I wouldn't need a dummy load. What's the duty cycle and reliablity at a constant 1.8A amps I plan on making a few of these bad boys
 

Tmack

0
Joined
Oct 13, 2013
Messages
2,478
Points
0
I agree. He will also help you if you just tell him exactly what you're goal is. I think I've recommended him to you before ;)
Duty cycle depends on the heat dissipation ability of the host.

In a small build maybe 1min. Large buildup to 5min.
 
Last edited:
Joined
Nov 18, 2013
Messages
50
Points
0
I agree. He will also help you if you just tell him exactly what you're goal is. I think I've recommended him to you before ;)
Duty cycle depends on the heat dissipation ability of the host.

In a small build maybe 1min. Large buildup to 5min.

C6 with standard heat sink is my goal so maybe a 1min per cycle. Thanks for the help! I'm really looking for the disposable battery option it's convenient :)
 

Tmack

0
Joined
Oct 13, 2013
Messages
2,478
Points
0
It may run the laser but not at the power desired. It would be substantially less if at all.
 
Last edited:
Joined
Nov 18, 2013
Messages
50
Points
0
Well 2 of those batteries offer 6V the range of input to the pre set driver is 4.2-8.4

The C6 houses two CR123A batteries :)
 




Top