- Joined
- May 25, 2012
- Messages
- 8
- Points
- 0
So I've made a nice little LM317 circuit and did some research so I thought I knew how to set the current accordingly. However when in actuality my laser diode is very very dim, I was wondering if anyone can correct my error.
Here's my diagram
http://i.imgur.com/chWj5.jpg
I also tried this with 2x 1 ohm resister in series instead of the 2x 10ohm parallel>
Thanks in advance guys!
Here's my diagram
http://i.imgur.com/chWj5.jpg
I also tried this with 2x 1 ohm resister in series instead of the 2x 10ohm parallel>
Thanks in advance guys!
Last edited: