- Joined
- Nov 11, 2014
- Messages
- 64
- Points
- 18
PLT5 450B single mode laser from above-picture.
an retailaluhousing with an alubacktrigger with an cobber-module inside and radial heatsink at front.
clocking in at 197mA at tailcap DMM on mA-setting and 0.169A on (10A) Amp-setting //2xAAA. (often puzzeles me why multimeters-values differs from when on Amp (10A) to when on mA (<600ma) setting and with so much and on relative accurrate meters..
(Le2max X822 campictures, plain no fog or likewise)
Btw, the 60US'labby on the handheld rack, is an NDB7775 2.5w with driver and all inside the heatsink-housing, that seem to be flooded with siliconerubber :-/ but its ideel to be run of RC 3cell lipo packs with an XT60 to jack adapter.. its clocking in around 1.20amp on attched RC'ampmeter (though its <12v as to the 1.2A)
an retailaluhousing with an alubacktrigger with an cobber-module inside and radial heatsink at front.
clocking in at 197mA at tailcap DMM on mA-setting and 0.169A on (10A) Amp-setting //2xAAA. (often puzzeles me why multimeters-values differs from when on Amp (10A) to when on mA (<600ma) setting and with so much and on relative accurrate meters..
(Le2max X822 campictures, plain no fog or likewise)
Btw, the 60US'labby on the handheld rack, is an NDB7775 2.5w with driver and all inside the heatsink-housing, that seem to be flooded with siliconerubber :-/ but its ideel to be run of RC 3cell lipo packs with an XT60 to jack adapter.. its clocking in around 1.20amp on attched RC'ampmeter (though its <12v as to the 1.2A)
Attachments
Last edited: