Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Getting the flashlight bug....need advice!

Joined
Mar 27, 2011
Messages
14,125
Points
113
They knurling is not very aggressive, but I don't think you would have trouble with this light slipping, since it's so easy to grab onto the heat fins, and the other features aid in holding it.

The two lights, C20 and the Crelant, without opening them up to see the internal setup, appear to be exactly the same. I wasn't kidding... without the imprinted logos, you would not be able to tell them apart, not from anything you can see in normal use. If anything the LED on the C20 is centered just a bit better.

On both the edges along the ovals on the sides, and on the heat fins are kind of sharp... I would prefer them to be smoother. While otherwise perfect, the crelant is showing wear specifically on those sharp edges. I've been pocket carrying it for two weeks now.

About modding, I'll see what he shows with the beamshots. I figured with the XPG2, or XPE fully driven it would throw nicely... it's odd that he says the XML is better vs XML2. Depending on the results I might just sell one of these lights. (I need to recoup - I spent too much lately.)

I got the Zebralight SC52 yesterday, and I'm blown away by it. If the SC600 Mark II is as good, that will end up being my EDC 18650 light.
 





Joined
Apr 13, 2011
Messages
26
Points
3
I like the Nitecore Ea4 and EC25, got them from fasttech.
The EA4 runs on 4aa Nimh batteries, 860 lumens and 20k lux. ;)
IlluminationSupply sells them too
 
Joined
Mar 27, 2011
Messages
14,125
Points
113
If anyone is interested, I will be selling my EA4W for $43 shipped anywhere in the US. It's like new, works perfectly.

Also looking to sell one modded, and one stock Skyray Kings.

Palight V60
Jetbeam M2S with Extension tube.
Elektrolumens Big Bruiser with two 22650 keeppower protected batteries.
Balder HD1
Crelant v11a
 
Joined
Oct 5, 2012
Messages
54
Points
0
beam shot of the crelant 7g2cs ea4 ea8 all on max power

mvmJioI.jpg
 
Joined
Oct 5, 2012
Messages
54
Points
0
its like 6 feet away ...the ea8 has good flood to but u cant see it in the close up beam shot the ea4 has good flood to ...you cant go wrong with if you buy any of these lights'''
you can also run the ea8 on 4 batteries if u want it will have the same brightness
 
Joined
Mar 27, 2011
Messages
14,125
Points
113
What I meant is the hotspot on the 7G2CS appears to be much smaller than on either of the other lights, where in reality it should be bigger.

Most likely this is just due to the shots being done at a close distance.
 




Top