Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

445nm - 10440 - Direct Drive Laser

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
I really like being off :)

Here is one that has been waiting for me to get the time to build it. It is a 445nm (A140) diode in a MagLight Solitaire AAA host. I picked up this host awhile back from Kenom. Ken had Jayrob machine down an AixiZ module to fit into the host. I set it up as a direct-drive 445nm with a 10440 battery. The 10440 is only 600mAh so I figure it will not harm the diode.

It is putting out 160mW with a fully charged battery. I do not know how long the battery will last yet.

Here it is along side a 10440 battery, my new Key Chain CR2 laser and a Kryton Groove
IMG_1059.jpg



In my hand for better perspective of size
IMG_1060.jpg


The obligatory beam shot (160mW)
IMG_1061.jpg


Only my lecture pointer left to build and I will be done experimenting with the 445nm diode in hand-helds :tinfoil:

Peace,
dave
 





pHeneX

0
Joined
Feb 8, 2010
Messages
162
Points
18
What od the module has to be to fit in the Solitaire host?
 

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
What od the module has to be to fit in the Solitaire host?

Sorry. I didn't measure it. Maybe Jayrob has it in his records. Both the "head" of the module and the threaded portion had to be machined down. The "head" to fit into the host and the threaded section to allow for the body of the host to slide past it so it can screw up tight against the head

Peace,
dave
 

TTerbo

0
Joined
May 20, 2010
Messages
1,361
Points
0
:eek:
here you are direct driving a laser and its alive, when mine died from 420mA using a driver ,
not fair :(
cheers
 

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
:eek:
here you are direct driving a laser and its alive, when mine died from 420mA using a driver ,
not fair :(
cheers

Yeah. Something else must have happened to yours. I cannot imagine one of these blowing at 420mA. I am not saying it didn't happen. I am just saying I cannot envision how it happened.

Peace,
dave
 
Joined
Jan 8, 2009
Messages
3,145
Points
83
Schweet builds!!! I have a build using the same unit as your middle one in the first pic... saving that for a 6x at 175mA. I've have a SF diode I was going to use. I need
to have a cap threaded to recieve a Aixiz cap. Any idea on a thread pitch and size?
 

TTerbo

0
Joined
May 20, 2010
Messages
1,361
Points
0
Yeah. Something else must have happened to yours. I cannot imagine one of these blowing at 420mA. I am not saying it didn't happen. I am just saying I cannot envision how it happened.

Peace,
dave

Should i maybe send it to you? see if it is reserectable?
i may just be a "noob" and your expertise may be able to revive this LEDd diode..or maybe even find out its not LEDd
 
Joined
Apr 12, 2010
Messages
279
Points
0
lol. this is an awesome little build dave, i love the portability and just miniscule form factor.

i would be on this if i hadnt won a fluke ebay auction and landed myself a scanner for under 100$
 
Joined
Dec 8, 2008
Messages
196
Points
0
Out of curiosity could you do a direct drive with the CR2 build you have in your picture Dave? I have the same kit from Jayrob and its just sitting on my bench just wondering it would be a cool build also :)

Justin
 

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Should i maybe send it to you? see if it is reserectable?
i may just be a "noob" and your expertise may be able to revive this LEDd diode..or maybe even find out its not LEDd

Based on reading the thread, I would think that it has already been tested to death. I think that you would be wasting your postage

Out of curiosity could you do a direct drive with the CR2 build you have in your picture Dave? I have the same kit from Jayrob and its just sitting on my bench just wondering it would be a cool build also :)

Justin

I don't see why not. My 3.7V CR2 is 600mAh as well.

However, you have enough room in the CR2 KeyChain host for a flexdrive. I always use a driver if I can. You can use one in the CR2 Keychain

Peace,
dave
 
Joined
Dec 6, 2008
Messages
1,581
Points
63
Nice build Dave !

Nice form factor for a blue pointer.

Now, you are in the 445nm direct drive club.

Some of the newest #18650 lithium-ion batteries are now designed for 4.35 VDC.

This allows for higher current with a direct drive.

LarryDFW
 
Joined
Apr 28, 2009
Messages
2,416
Points
63
Very cool! Such a tiny device. As long as the LD can't see voltage exceeding ~5.5 volts, it should work. And it's a rechargeable battery, so it's easy to pop the battery into the charger as necessary.
 
Last edited:

Things

0
Joined
May 1, 2007
Messages
7,517
Points
0
Most Li-Ion batteries should idle at about 4.3V fully charged anyway. Not sure why they rate them at 3.7V.
 
Joined
Dec 29, 2009
Messages
3,136
Points
63
Dave, very compact build! Finally, a Solitaire that can be used for something other than hiding notes or matches ;)

Please be careful not to go over the maximum discharge rate of that 10440. In fact, some of the china sites now have protected 10440's, you might look into those.

2*capacity is the usual discharge maximum. The usual capacity for a 10440 seems to be right around 350mAh, so ~0.7A would be your maximum safe continuous discharge rating.

I'm probably just being paranoid, but just thought I'd throw it out there.

Again, nice build. Points for most compact build I've seen. I like how the lens nut seems to fit just perfectly in the head of it.
 




Top