Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: Full Colour Driver Extension for the White Fusion kit

Joined
Jan 12, 2008
Messages
3,290
Points
83
hey I am interested in building a white fusion laser plus adding this but before jumping in over my head could someone please point me in the right direction fro how and what was used to make the beam make those patterns? what exactly was used?
I can't understand what you mean, please explain further. :confused:
 





Joined
Jan 12, 2008
Messages
3,290
Points
83
I'm having some problems with people who make an order but never call back when the driver is done. You don't bail out on your order! The driver has been made after your specs and it is allot of work put into it. I could "recycle" the driver if you choose to bail, but it is still allot of work to replace the components and re-test it, in fact allot harder than doing it from the start! I have sent repeated PMs and posted here as well but I never get a reply back! If you want the driver or not please act now!
 
Joined
May 4, 2009
Messages
470
Points
28
Hey FML,

That is always a problem with "made to order" parts. I would suggest not adding the current limiting resistors till after they have paid.
 
Joined
Jan 12, 2008
Messages
3,290
Points
83
I guess so.. Still I find it very rude and annoying not to get a single response, update or... SOMETHING.
 
Joined
May 4, 2009
Messages
470
Points
28
I hear ya. I totally understand. when situations change on a guy or they decide to do some else. It is rude though when they don't respond to PMs even though they are still active and must have seen your pm...
 

Danjoo

0
Joined
Sep 18, 2008
Messages
202
Points
0
Hi

Any Driver for me left!

Maybe one ready to ship one?
For the currents, i want to go with a phr803t violet diode.
I want to go to the limits of this diode for the white beam.

My papal is loaded and ready to buy.

Please let me know. by PM maybe

Best regards

Daniel
 
Joined
Aug 25, 2007
Messages
2,007
Points
63
Quick question for you...I saw that Mr. Willing changed the resistor values to get a higher max current out of your driver than 449mA. Is the only current limit for your driver the current that the LM317 can handle (and the current the battery can put out, of course)?

Ie what is the real limit for the current that is safe for your driver if I change the limiting resistors?
 
Joined
Jan 12, 2008
Messages
3,290
Points
83
The limit of the transistors is 800mA. Why I don't go above 450mA is because of the extra heat (though it can be handled with proper cooling, but is is not very practical). Also I would have to get higher wattage resistors which cost allot more, and even more so when everyone wants different currents (also not very practical, on my end). So that is why if you want more out of the driver, you have to do it yourself with my help.

Hi

Any Driver for me left!

Maybe one ready to ship one?
For the currents, i want to go with a phr803t violet diode.
I want to go to the limits of this diode for the white beam.

My papal is loaded and ready to buy.

Please let me know. by PM maybe

Best regards

Daniel

Sorry I didn't see you there, I must have missed it. I'm running low on parts right now, but I have two drivers already done, but with someone's name on them. If they could decide to buy them or not my life would be so much easier...
I'll see what I can do.
 
Joined
Aug 25, 2007
Messages
2,007
Points
63
The limit of the transistors is 800mA. Why I don't go above 450mA is because of the extra heat (though it can be handled with proper cooling, but is is not very practical). Also I would have to get higher wattage resistors which cost allot more, and even more so when everyone wants different currents (also not very practical, on my end). So that is why if you want more out of the driver, you have to do it yourself with my help.

Makes perfect sense, and exactly what I wanted to hear :thanks:



Sorry I didn't see you there, I must have missed it. I'm running low on parts right now, but I have two drivers already done, but with someone's name on them. If they could decide to buy them or not my life would be so much easier...
I'll see what I can do.

...You're not waiting on me, are you? :yabbem: I'm still definitely buying, but I'm still not quite ready yet (stupid taxes)...
 
Joined
Jan 12, 2008
Messages
3,290
Points
83
Well better late than never, I'll ship it asap after payment, you want me to re-send the details?
 
Joined
Jan 12, 2008
Messages
3,290
Points
83
SHIN, bhank, 2007Revolution: You have been on the list for along time now but haven't shown any further interest in the driver, I give you 1 week to get one. After that I will remove you from the list so someone else can have it. If you know now that you don't want in, please let me know asap. Thanks!
 




Top