`jetlasers gb #4 is now CLOSED our $$ is in China

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

Yeah i was banking on the little later payment date also
If we could wait till like may 1st for payment would be spectacular..

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

Hey aryntha, even if this goes through earlier than we thought, I will still wait for the arrangement that we made.

Cool?

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

Thanks a lot for that madog... That helps a lot.

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

we are flexable- see the OP for new prices - I will do my best to make all happy.

however some are wanting delivery by mid may and others cant pay for another 40 days so what would you do? there IS going to be GB#5 so no one will be left out.

the NEW PL-G will be ready (AFAIK) for the next round. Artisist rendering going up here asap. better looking than the arctic!!!

no other details atm.
But I do know that it has three leds....
hak

PS I see no prob on waiting til May 1st/2nd to do the bank transfer--

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

Awesome hak

So i saw the new prices.
And I still want the 250mW PL-C 532 for $269, or i may go to the 300mW PL-C 532 for $315

What do you think the outputs will be on these? Still overspec?

Say, as in, will the 250 be ~300mW, and the 300 be around 350-400mW?

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

jakeGT said:

Awesome hak

So i saw the new prices.
And I still want the 250mW PL-C 532 for $269, or i may go to the 300mW PL-C 532 for $315

What do you think the outputs will be on these? Still overspec?

Say, as in, will the 250 be ~300mW, and the 300 be around 350-400mW?

Click to expand...

I am wondering the same thing. In the OP it says PL-C 250mW and then he put (peak 375mW)

So are the PL-C 250s (with the adjusted price) still that over spec?

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

weidmark said:

I am wondering the same thing. In the OP it says PL-C 250mW and then he put (peak 375mW)

So are the PL-C 250s (with the adjusted price) still that over spec?

Click to expand...

Exactly, if the 250's are ~375mW, I'll stick with that.
But if i am gonna get 250mW with a 250 I would rather go with a 300.

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

808nm Near IR Power

2000mw >2000mw 35$ 399-599$

I think i will try this one, it is a steel for 35$ ;-)

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

The 1064 is listed as hot hot. What does that mean? Hot price? Or very high heat beam?

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

Whodunit13579 said:

The 1064 is listed as hot hot. What does that mean? Hot price? Or very high heat beam?

Click to expand...

I think it may be an imperfect Chinese translation of "burning." Maybe?

-Trevor

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

Whodunit13579 said:

The 1064 is listed as hot hot. What does that mean? Hot price? Or very high heat beam?

Click to expand...

Is that a joke?

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

By HOT I think that means it is quite the burner-IR is like that and A hot PRICE TOO. About the overspec- I cannot tell HOW much overspec they will be--I can only go by the last ones we got- no two are exactly alike. But all were overspec and hte best were over 375mWs.

I assign them to the buyers in a random fashion. Then I meter them- Aryntha got the best IIRC and it was overspec on his meter with a peak of 400+ mWs. We gave Gray an Alpha(which you should know is a good but still a hobbiest meter) for Xmas and he will check all to be sure we get good ones but as far as any type of guarantee on the amount of overspec ...well.
AFAIK they are either the same or better PL-Cs as improvements have been made. Buy 10 green or Br pointers and no two may give the same output. Prices on PL-Cs have come down some but quality will be the same. When you get your LPM pics you still have the option of declining the final shipping and get 100% refund. If you can come with a better/fairer way to do it I am open for suggestions. In DPSS lasers crystal alignment is one factor in output. And this is not an exact science if I understand it correctly. I look fwd to discussion of these matters, but unrealistic expectations are just that. If you want 400+mWs from a 532 i suggest you get the 300mW or larger. We all got a nice break on shipping for GB#3- Cost to ship a 15lb box of PL-C and Tis Express is nearly or over 100$ and this had to be done 3 times due to the need to return some for adjustment. Gray and JETL covered that without hesitation, as it should, at least for the return and subsequent 3rd shipping (on the way btw- left HongKong today)

HERE IS A SNEAK PEEK OF THE PL-G- Gray sez it has multi-modes with pulse (and of course CW) and something very similar to the spyder smart switch. The finish will not wear off (lile the spyder) and you will not find any Al bits/shavings /etc inside (like some did in thier spyders) and the overall look will be very professional. The spyder I saw looked quite crude which if what I heard is true(WL paid less than $5 per host) and understand why. You get what you pay for. I know no other details ATM. This is not a photo of the PL-G but rather an artists/designer rendering. I like the look.

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

Don't tempt me!

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

That PL-G looks so awesome

A few questions hak.

The 635nm's.... are they single or multi-mode? What 635 diode/c-mount do they use? the 200-300mW models will be, as they say, anywhere between 2-300mW?

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

I have the same questions, Jake, as that is what I want(when I can afford-prolly #5) I am far from an expert but i think it would have to be C mount. Ask Gray and he will find out from thier Techs. I THINK what they mean is the 200mW will be 200 or overspec as high as 300mWs, but again that is a question for Gray- as IDK

.
$310 for the 200mW (reg price retail is 349$ to 489$
and $440 for the 400mW. (reg. retail:489$ to 689$) <l:~)


I have a PL-C 650nm/250mW and it peaks at 384 mWs - but your mileage may vary. The spot is slightly rectangular at distance. afaik its single mode. I like it. I am going to save up for a PL-G 200mW 635nm.

hak

Re: `jetlasers gb #4 is now on!!!!!!!!!!!!!

There is a single mode 635nm diode that can reach 200mW, but then it's ~639nm by then, but still, 200mW of 639, is as bright as 660mW of 650Nm